LABAB website - Communications internationales

2025

[1] Oudrane A., Bada A., Aour B., Hamouda M., Study of the thermal behavior of a workplace in an arid region: Case study, 7^th International Symposium on New and Renewable Energies SIENR 2025, October 15-16^th, 2025, Ghardaia (Algeria).

2024

[1] Draï A., Aour B., Daikh A. A., Modeling and Numerical Simulation of severe Plastic Deformation of Polymers by high Pressure Torsion: developmenyts and Recent advances, 2nd International Conference on Trends in advanced Researc ICTAR 2024, November 22-23, 2024, Konya, Turkey.

2023

[1]Draï A., Aour B. , Daikh A, Bnaoum A., Ladmek M., Belkacem A., Mechanical Optimization of E-FGM Plates Composition for Solar Photovoltaic’s Plates. 3^rd International Conference on Engineering and Applied Natural Sciences, 14-17. January 2023. Konya/Turkey.

[2] Belkorissat I., Effect of porosity on mechanical behavior of Functionally Graded Plates
(E-FGM), 3rd International Conference on Engineering and Applied Natural Sciences, 14-17 January 2023, Konya,Turkey.

[3] Bentahar M., all., ALLDMD Dissipation Energy Analysis by the Method Extended Finite Elements of a 2D Cracked Structure of an Elastic Linear Isotropic Homogeneous Material, Journal of Electronics, Computer Networking and Applied Mathematics, 7^th International Multidisciplinary Conference on Current Research 2023. file:///C|/Users/LABAB/Desktop/CV%202023/CV%202023/imccrt.iikr.in

[4] Bentahar M., all., Numerical study of a centred crack on an elastoplastic material by the FEM method, Tribology and Materials, 2023, Eudoxia Research University USA,

https://eudoxiaresearchuniversity.us/international-conference-2022.

[5] Bentahar M., Benzaama H., Crack Paramtre Analysis by SFEM Method of Ultra High Molecular Weight Polyethylene Material UHMWPE, 1^st International Conference on Material Science and Applications" ICMSA", Abbes Laghrour University of Algeria. 2023. https://icmsa2023.sciencesconf.org/

[5] Bentahar M., Numerical modeling of the crack propagation parameters of two different elements by the FEM method, 1^st International Conference on Material Science and Applications" ICMSA", Abbes Laghrour University of Algeria. 2023. https://icmsa2023.sciencesconf.org/

[6] Bentahar M., Numerical modeling of evaluation of the various energies by the FEM method of a cracked structure, 1^st International Conference on Hydrocarbons, Renewable Energies, Materials and Environment, Adrar, Algeria ICHREME’2023. 2023, https://ichreme.univ-adrar.edu.dz/

[7] Bentahar M., Study of Composite Polylatic Based Biopolymers, International Conference on New Frontiers on the Global Stage of Multidiscplinary Research (ICNMR-2023), Eudoxia Research University- USA And Eudoxia Research Centre In Association with the American. 2023.

[8] Bentahar M., Experimental analysis for the determination of the deflection by the device (gunt HAMBURG), BİLSEL INTERNATIONAL SUMELA SCIENTIFIC RESEARCHES CONGRESS, TRABZON/TURKEY, 2023. https://bilselkongreleri.com/kongreler

[9] Bentahar M., Numerical analysis by the FEM method of a three- dimensional reinforced concrete beam model, BİLSEL INTERNATIONAL SUMELA SCIENTIFIC RESEARCHES CONGRESS, 2023.

[10] Bentahar M., Numerical modeling of the linear behavior of reinforced concrete beam by the FEM method, INTERNATIONAL ULUDAĞ SCIENTIFIC RESEARCH CONGRESS, BURSA/TURKEY, 2023.

[11] Bentahar M., Experimental Study of the Behavior of Submitted Pieces to Simple Flexion, INTERNATIONAL ULUDAĞ SCIENTIFIC RESEARCH CONGRESS, BURSA/TURKEY, 15-16 JULY 2023.

[12] Bentahar M., Experimental study of the deflection of parts of different materials subjected to simple bending, Second International Conference on Recent Advances in Social Sciences, Humanities, Management and Scientific Research (RAMAS 2023) Sciences, 28th & 29th July 2023, Eudoxia Research University, ERU-USA & Eudoxia Research Center, India.

[13] Bentahar M., Numerical simulation by the FEM method of a linear behavior of a reinforced concrete beam, Second International Conference on Recent Advances in Social Sciences, Humanities, Management and Scientific Research (RAMAS 2023), 28th & 29th July 2023, Eudoxia Research University, ERU-USA & Eudoxia Research Center, India.

[14] Bentahar M., Analysis by the application of the SFEM method of a two-dimensional problem of crack propagation of two materials AL57-54 and XC65-90, 1^st International Conference on Hydrocarbons, Renewable Energies, Materials and Environment, Adrar, Algeria ICHREME’2023. 29 – 30 April 2023, https://ichreme.univ-adrar.edu.dz/

[15] Dehbi F., Brahami M., Reda M.H., Aour B., Logistic regression for sentiment powered product Recommendations with hybrid technique, 8th International Education and Innovative Sciences Congress IEISC2023, November 24-26, 2023, Ankara Turkey

[16] Dehbi F., Brahami M., Reda M.H., Aour B., Elevating product recommendations empowering with sentiment analysis and collaborative filtering using restricted Boltzmann machines, 8th International Education and Innovative Sciences Congress IEISC2023, November 24-26, 2023, Ankara Turkey.

[17] Belaghit A., Aour B., A numerical study on the flow of blood in a healthy aorta and aorta with stent during the cardiac cycle, The 1st International Conference on Innovation Research in Materials and Nanotechnology (ICIRMN 2023), November 29-30, 2023, University of Ghardaia, Algeria.

2022

[1] Draï A., Aour B., Daikh A., Mechanical behavior of exponential functionally graded sandwich plates under buckling load and resting on elastic foundation. First International Conference on Heterostructured Materials (HSM I) 12- 15 July 2022, Hong Kong/China.

[2] Dahbi A., Benmedjahed M., Khelfaoui A., Aoun N., Harrag A., Bouraiou A., Benlahbib B., Kadi S., Slimani A., Neçaibia A., Chogueur D., Mouhadjer S., Hamouda H., Tidjar B., Oudrane A., Kadri A.Y., Belhadj Z., A Comparative study between MPPT using PI and Fuzzy Logic Control for Wind Turbine system ''. 19^th IEEE
International MultiConference on Systems, Signals & Devices SSD'2022 held in SETIF - May 06th -10th, 2022.

[3] Drai A., DAIKH A., AOUR B., A. BENAOUM M., Mechanical behaviour of E-FGM sandwich plates under buckling and resting on new elastic foundation. 7^th International Conference on Mechanics and Energy "ICME'2022" , December 21-23, 2022 in Hammamet, TUNISIA.

[4] Bentahar M., Benzaama H., Numerical Modeling of the Stress Intensity Factors and the J-Contour Integral of an Elliptical Crack of an Isotropic Material, 10^th International Conference on Advanced Technologies (ICAT’22),TÜRKİYE, 2022, https://www.icatsconf.org/ICAT23/istanbul/past-conferences

[5] Bentahar M., Benzaama H., 2D Crack propagation numerical simulation using SFEM method in Abaqus,TÜRKİYE, 2022, 10^th International Conference on Advanced Technologies (ICAT’22) https://www.icatsconf.org/ICAT23/istanbul/past-conferences

[6] Bentahar M., Benzaama H., Numerical simulation of the synthetic strain energy and crack characterization parameters using the FEM method of a two-dimensional multi-position model, International Conference on Engineering Technologies ICENTE, Konya, Turkey , 2022, https://icente.selcuk.edu.tr/program

[7] Bentahar M., ESTIMATION OF THE J-INTEGRAL BY THE FEM METHOD OF A 2-DIMENSIONAL MODEL, ANKARA INTERNATIONAL CONGRESS ON SCIENTIFIC RESEARCH-VII, Ankara, Türkiye,2022.

[8] Bentahar M., 2D NUMERICAL MODELING OF A MODEL OF A CRACKED STRUCTURE CONTAINING A HOLE BY THE FEM METHOD, ANKARA INTERNATIONAL CONGRESS ON SCIENTIFIC RESEARCH-VII,Ankara, Türkiye,2022.

[9] Bentahar M., ANALYSIS OF FATIGUE CRACK GROWTH PARAMETERS OF TWO MATERIALS AL57-54 AND XC65-90 STEEL BY SFEM METHOD, 4^th International Conference on Electromechanical Engineering (ICEE2022), university of Skikda, Algeria. 2022.

[10] Bentahar M., NUMERICAL STUDY TO EVALUATE THE DIFFERENT ENERGIES OF AN INCLINED CRACK OF AN ELASTOPLASTIC MATERIAL, 4^th International Conference on Electromechanical Engineering (ICEE2022), university of Skikda, Algeria. 2022.

[11] Bentahar M., THE ANALYSIS OF AN INITIAL CRACK BY THE APPLICATION OF THE SFEM METHOD OF A ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE MATERIAL, 3^th International Cappadocia Scientific Research Congress, Cappadocia-Nevsehir, Türkiye, organised IKSAD Institute, 2022.

[12] Bentahar M., ANALYSIS OF FATIGUE CRACK GROWTH PARAMETERS OF TWO MATERIALS AL57-54 AND XC65-90 STEEL BY SFEM METHOD, 3^th International Cappadocia Scientific Research Congress, Cappadocia-Nevsehir, Türkiye, organised IKSAD Institute. 2022.

[13] Bentahar M., ANALYSIS OF DISSIPATION ENERGY BY THE EXTENDED FINITE ELEMENT METHOD OF A 2-DIMENSIONALS PROBLEMS, 3^th International Cappadocia Scientific Research Congress on 11-12 December, Cappadocia-Nevsehir, Türkiye, organised by IKSAD Institute, 2022.

[14] Drai A., AOUR B., Daikh A., A. BENAOUM M., Ladmek M., Belkacem A., Thermal effect on optimization of FGM materials composition for better environment, Second International Conference on Geosciences & Environment, ICGSE2022, Mascara, Algeria September 17 & 18, 2022.

[15] BRAHAMI M., SABRI M., KEDİDİR C., DEHBI F., Sentiment Analysis for Product Recommendation on Amazon’s Mobile Phone Reviews using Machine Learning Techniques. International Aegean Conference on Innovation Technologies and Engineering. September 02-04, 2022, Ege University, Izmir, Türkiye, Proceedings Book by IKSAD GLOBAL PUBLISHING HOUSE, ISBN: 978-625-8213-60-7 (https://www.egekongreleri.org/technology-engineering)

[16] BRAHAMI M., SABRI M., CHETA O., KHIAR A., Feature Analysis of IoT Botnet Attacks using Deep Learning. International Aegean Conference on Innovation Technologies and Engineering. September 02-04, 2022, Ege University, Izmir, Türkiye, Proceedings Book by IKSAD GLOBAL PUBLISHING HOUSE, ISBN: 978-625-8213-60-7 (https://www.egekongreleri.org/technology-engineering)

2021

[1] Oudrane A., Aour B., Hamouda M., Damba N., Modeling of incidental solar flow on the building walls for Adrar site’’, The First International Conference on Energy Transition and Security, Virtuel conference ICETS’21, May 22-24^th, 2021, Adrar (Algeria).

[2] Belarbi B., Sadek K., Bennouna M.S., Aour B., Implementation of parts manufacturing processes, Case: using the sheet metal forming method, Séminaire International sur les Sciences de la Matière (Physique et Chimie) en ligne (Webinaire), organisé par Algerian Journal of Engineering, architecture and Urbanism les 17 et 18 Septemebre 2021, Université UST Oran.

[3] Drai A., Aour B., Belayachi N., Talha A., Benseddiq N., Finite element modeling of the behavior of PMMA during high pressure torsion process. 3^rd Workshop on Characterization and Analysis of Nanomaterials (WCANM-2021), University of Aveiro, Portugal, 3-5 February 2021.

2020

[1] Abdelouahed E.A., Bouzitouna W.N., Mokhtari M., Benzaama H., Effect of fiber orientation and the type ofcomposite hybrid patch on the efficiency of pipeline repair. XIIIème Journée Maghrébines des Sciences des Matériaux (JMSM’2020), Oran 09-11 Mars 2020.

[2] Bentahar M., Mahmoudi N., Benzaama H., Modélisation de la propagation de fissure en FEM 2D par la méthode d'étirement de la maille. 1^ère Conférence Internationale sur les Energie Renouvelables & Les Matériaux Avencés"ERMA19" of Relizane(Algérie), from 17-18 Février 2020. https://erma19.sciencesconf.org/

[3] Mahmoudi N., Bentahar M., Aminellah L., Daikh A., Study of composite polylactic based biopolymers. 1ère Conférence Internationale sur les Energie Renouvelables & Les Matériaux Avencés"ERMA19" of Relizane(Algérie), from 17-18 Février 2020. https://erma19.sciencesconf.org/

[4] Lazaroiu G., Ciupageanu D.A., Hazmoune M., Vatuiu T., design of an enhanced performance hybrid autonomous system , 20th international Multidisciplinary Scientific GeoConference SGEM 2020.

[5] Abdeldjouad F., Brahami M., Matta N., A Hybrid Approach for Heart Disease Diagnosis and Prediction Using Machine Learning Techniques. In. Jmaiel, M., Mokhtari, M., Abdulrazak, B., Aloulou, H., & Kallel, S. (Eds.). Book Title: The Impact of Digital Technologies on Public Health in Developed and Developing Countries. Proceedings of 18th International Conference On Smart Living and Public Health (ICOST'20), Lecture Notes in Computer Science, vol. 12157, Springer-Verlag, 2020, pp 299-305 (Indexed by the EI Engineering Index (Compendex and Inspec databases), Scopus and ISI Conference Proceedings Citation Index - Science (CPCI-S), included in ISI Web of Science).

2019

[1] Khaldi M., Bouziane M.M., Aour B., Khelil F., Vivet A., Experimental Analysis of Hygrothermal Behavior of Elementary Lignocellulosic Fibers from Stipa tenacissima L, 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[2] Khelil F., Benaoum F. , Aour B., Sadek K., Drai A., Bennouna M.S., Initiation à la conception et fabrication de la prothèse tibiale, 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[3]Keddar I., Aour B., ZAHAF S., Biomechanical evaluation for distal humeral fractures with intramedullary nail, 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[4] Damba N., Aour B., Chemmami A., Effet de niveau de la pose de la prothèse discale sur le comportement de rachis cervicale (C2-C7), 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[5] Mebarki S., Aour B., Etienne MALACHANNE, Franck JOURDAN, A. BELAGHIT, A. GASMI, Etude numérique du comportement biomécanique des différentes méthodes d’implantation de la prothèse d’épaule inversée, 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[6] Chemmami A., Aour B., Damba N., Modélisation numérique du comportement élastique et hyper-élastique de l’unité fonctionnelle L4-L5 sous sollicitation de compression, 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[7] Aroussi D., Aour B., BOUAZIZ A.S., Etude comparative entre deux métaux passifs en milieu biologique agressif : Acier inoxydable « AISI 316L » et un alliage de titane, 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[8] Larabi I., Aour B., EVRARD L., Larabi M., Finite element analysis of biomechanical behaviour of zygomatic implants techniques in case of edentulous and severely atrophic maxilla: a systematic review, 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[9] Boumaiza D., Aour B., Khelil F., An Iterative coupling FEM-BEM for solving the elasto-plastic problems, 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[10] Belaghit A., Aour B., Larabi M., Mebarki S., Abdelouhad E., Tadjeddine A., Computational analysis of blood flow in a healthy aorta with endoprosthesis ,1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[11] HAMANI H., Aour B., Chiali H., Influence des matériaux des prothèses totale de hanche sur la stabilité primaire du ciment chirurgical PMMA, 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[12] Drai A., Aour B., Bennouna M.S., Etude de l’effet de la température sur le comportement de PMMA au cours du processus de Torsion sous Haute Pression, 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[13] Benaoum F., Khelil F., Aour B., Oudrane A., Drai A., Bennouna M.S., Numerical investigation of mechanical behavior of cruciformspecimens en PMMA, 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[14] Ameur Ameur B., Chami A., Boumaiza D., Aour B., Modélisation par éléments finis d’un fauteuil roulant manuel, 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[15] Belarbi B., Ghernaout M.A., Aour B., Benahmed N.,Contribution in the design of prostheses human body prototypes and the realization by the 3D printer depositing melted wire in rapid prototyping, 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[16] Fares I., Aour B., Hachemi S., Develipment of a three-dimensional finite element model of the knee joint, International Congress of Clinical Anatomy the First Maghrebin Congress of Clinical Anatomy, 15-16-17 June 2019, Bejaïa, Algeria. http://photos.univ-bejaia.dz/index.php/2019/06/1er-congres-maghrebin-danatomie-clinique/.

[17] Dekmous M., Bououden A., Benchenane H., Mouhadjer H., Mekkakia-Maaza N., Derguini N., Capacitive sensor for the characterization of a liquid medium, 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[18] Benbrahim A., Benchenane H., Boukabache A., Mekkakia Maaza N., Modélisation différentes topologies de micro bobine planaire pour la manipulation des microbilles magnétiques, 1st International Conference on Innovation in Biomechanics And Biomaterials (ICIBAB 2019), April 10-11, 2019, Oran.

[19] Khaldi M, Bouziane M M, Vivet A, Bougherara A, Mujte P. Improved mechanical properties of alfa fibers/ polypropylene composites partially biosourced: Effect of maleic anhydrid. The First International Conference on Materials, Environment, Mechanical and Industrial Systems ICMEMIS’19. 29th- 30th June 2019, Djelfa, Algeria.

[20] Sabri M., Brahami M., Rahal S.A., Matta N., Epidemiological Researches Approach using Data Mining Technics, The 7th International Conference on Control Engineering &Information Technology (CEIT-2019), Tetouan, Morocco on October 24–26, 2019. http://ensate.uae.ac.ma/CEIT2019/

[21] Oudrane A., Aour B., Zeghmati B., Chesneau X., Messaoud H. , Etude comparative entre le béton et le bois pour les constructions habitables dans la région d’Adrar, International Conference on Materials, Patrimony and the Environment in Arid Zones " ICMaPEAZ’19" les 17 & 18 Février 2019, Université d’Adrar.

[22] Khaldi M., Bouzine M.M., Vivet A., Bougherara H., À propos de l'influence de la température sur les propriétés mécaniques des fibres d'Alfa, International Conference of Mechanics and Materials ICMM2019 ,
November 12, 2019 , Université Setif 1

[23] Khaldi M., Bouzine M.M., Vivet A., Bougherara H., Flnlte element analysis of fractured hip cement spacers, International Conference of Mechanics and Materials ICMM2019 ,November 12, 2019 , Université Setif 1

[24] Khaldi M., Bouzine M.M., Vivet A., Analyse expérimentale de l'influence de l'Humidité relative sur les propriétés mécaniques des fibres élémentaires d'Alfa, International Conference of Mechanics and Materials ICMM2019 ,November 12, 2019 , Université Setif 1

[25] Draï A., Aour B., Benaoum A., Daikh A.A., 3D finite element modeling of thermal behavior of HDPE under HPT process, International Conference on Mechanics and Energy December 19-21, 2019, Monastir, TUNISIA.http://icme.aicme.net/images/abstract/A_DRAI_ICME_2019_paper_105635_134248.pdf

2018

[1] Moualek S., Ghebriout B., Benhadji Serradj M., Baba-Ahmed M., Modélisation 3D à partir des coupes anatomiques du squelette du membre supérieur: humérus gauche, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran.

[2] Belaghit A., Aour B., Larabi M., Tadjeddine A. A., Arbaoui I., Modelisation numerique de l’écoulement sanguin dans une aorte sain et une aorte avec stent, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran

[3] Gasmi B., Sahli A., Benbarek S., Aour B., Initiation and Propagation of a Crack Emanated From a Cavity in the Orthopedic Cement of a Total Hip Replacement Using XFEM, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran

[4] Damba N., Aour B., Belkahla N., Modélisation numérique du comportement du rachis cervical sous l’effet d’une sollicitation de flexion/extension, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran

[5] Khelil F., Beanaoum F., Aour B., Larabi E., Numerical fracture analysis using a virtual strain gage method, 4^èmes Journées scientifiques Franco-Maghrébines : Caractérisation des Matériaux Complexes, 22-24 Octobre 2018 Hammamet (Tunisie)Site : www.jsfm-cmc.com

[6] Mebarki S., Aour B., Larabi M., Analyse numérique du comportement biomécanique de la greffe d'une prothèse d’épaule inverse sous différents mouvements d'abduction du bras, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran

[7] Keddar I., Aour B., Etude de l’influence de l’angle d’inclinaison du fémur sur le comportement de la prothèse totale du genou,Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018) , 04-05 Avril 2018, Oran.

[8] Hamani H., Aour B., Etude de l’influence du type de biomatériaux des implants fémoraux sur le comportement du couple implant-ciment, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran.

[9] Hamani H., Aour B., Effet de l’angle cervico-diaphysaire sur la stabilité statique dans le système fémoral implant-ciment, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran, Algeria. http://labab.enp-oran.dz/

[10] Zahaf S., Aour B. , Mestar A., Zina N., Study of the behavior of microcracks in the cement layer on the total hip prosthesis cup analyzed by the finite element method, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran

[11] Zahaf S., Aour B. , Mestar A., Zina N., Biomechanical study on the effect of the posterior loading on the component of the spine analyzed by the finite element method, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran

[12] Houari H., Aour B., Draï A., Khelil F., Serier Z., Etude du comportement hygrothermique des composites hybrides, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran

[13] Drai A., Aour B., Khelil F., Houari H., M.S. Bennouna, Benhamena A., Modélisation du comportement de PMMA au cours du processus de Torsion sous Haute Pression, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran

[14] Ameur Ameur B., Boumaiza, B. Aour, ETUDE ET CONCEPTION D’UN FAUTEIL ROULANT A PROPULSION MANUELLE, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018) , 04-05 Avril 2018, Oran

[15] Bennouna M.S., Aour B., Sadek F., Damba N., Draï A., Benaoum F., Contribution à l’optimisation des paramètres géométriques du dispositif de CGP pour la déformation plastique sévère des polymères, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran

[16] Hammar S., Benchenane H., Boukabache A., Benbrahim A., and Aour B., Modeling and Optimization of Planar Micro-Coils Integrated in Microfluidic Devices, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran

[17] Meddeber W., Aour B., Larabi M., Assistance au Déplacement par un Système de Localisation Multicapteurs, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran.

[18] Khelil F., Aour B., Benaoum F., Belalia F., Draï A., Houari H., Benhamena A., Numerical investigation of mechanical behavior of cruciform specimens, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran

[19] Sadek K., Aour B., Bennouna M.S., Khelil F., Analyse de la Zone d’Endommagement des Structures Réparées par Patches en Composites, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran

[20] Oudrane A., Aour B., Benyoub M., Etude et Investigation Numérique du Confort Thermique pour une Enveloppe Habitable dans la Région d’Adrar, Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran

[21] Benzaama H., Mokhtar M., Hamadouche F. and K. Madani «Using a cohesive damage model to predict the compressive and tensile behavior on the failure load of a single lap bonded joint», ICCE-26, Paris, 15-21 juillet 2018.

[22] Benzaama H., Mokhtar M., Benzaama A., Slamen and I. Mrabent « Damage prediction of aluminum 2024T3 notched under tensile load using XFEM technics»,ICCE-26, Paris, 15-21 juillet 2018.

[23] Hamadouche F., Benzaama H., and Becherif M.M., «Détermination des paramètres de fractures dans un implant dentaire par la SFEM avec différents matériaux : Titane, Zircon et céramique», Workshop International sur l'Innovation en Biomécanique et Biomatériaux (IWIBAB 2018), 04-05 Avril 2018, Oran.

[24] Gouasmi S., Larbi Chaht F., Benzaama H., and Megueni A., Analyse numérique de l’effet du gradient des propriétés sur la réduction des concentrations des contraintes d’une entaille, SIGC 2018, ENPO-MA, 27-28 novembre 2018.

[25] Benzaama H., Mokhtari M. , Hamadouche F., Madani K., Using a Cohesive Damage Model To Predict the Compressive And tensile Behavior on the failure load of single lap Bonded joint, 26^th Annual International Conferance on composites or nano engineering ICCE 26 paris france july 15-21 2018.

[26] Hamadouche F., Benzaama H., et M.Tahar Abbas., trends on the fracture and environment,internationale conference on fracture mechanics and energy , fract4 held hassiba Benbouali university of chlef 26-29 novembre 2018.

[27] Khaldi M., Bouziane M. M., Mahmoudi N., Khelil F., Aour B., A. Vivet, Etude de caractérisation des propriétés des Bio-composites fibres courtes d'alfa / polypropylène: Effet de l'Anhydride Maléique, International Workshop on Innovation in Biomechanics and Biomaterials (IWIBAB 2018), 04-05 Avril 2018, Oran. http://labab.enp-oran.dz/?Manifestations

[28] Belkorissat I., Abbas S., Messafeur R., Bounouara F., Influence de l'effet des petites échelles sur le comportement dynamique des matériaux composites, Séminaire International de génie civil (SIGC2018), 27-28 Novembre 2018, ENPO -MA, Oran, Algérie. http://www.enp-oran.dz/2018/11/26/seminaire-international/

[29] Bounouara F., Messafeur R., Belkorissat I., Bourada M., Tounsi A., Benrahou K H., La vibration libre des nanoplaques FGM reposant sur une fondation élastique Winkler, Séminaire International de génie civil (SIGC2018), 27-28 Novembre 2018, ENPO-MA, Oran, Algérie. http://www.enp-oran.dz/2018/11/26/seminaire-international/

[30] Abbas S., Boussoula A., Belkorissat I., Effet de la distribution de deux matériaux selon l'épaisseur sur la flexion des plaques composites céramique métal, Séminaire International de génie civil (SIGC2018), 27-28 Novembre 2018, ENPO -MA, Oran, Algérie. http://www.enp-oran.dz/2018/11/26/seminaire-international/

[31] M. Debbache, H. Karoua, M. Laissaoui, Hazmoune M., A. Takilalte, A .Bouhallassa, S. Lecheheb, S. Bouaichaoui, A. Hamidat and K. Imessad, Design parameters effect on annual energy production of proposed design of parabolic trough solar plant, International Renewable and Sustainable Energy Conference (IRSEC’18), Morocco 2018.

2017

[1] Benhadji-Serradj M., Conception d’un laboratoire de plastination au niveau du service d’anatomie générale, 99^ème Congrès de l’association des Morphologiste 9-11 MARS 2017. REIMS. FACULTE DE MEDECINE ET PHARMACIE

[2] Chabane F., Benhadji-serradj M., La technique de plastination dans la conservation des coupes anatomiques du cerveau, 99^ème Congrès de l’association des Morphologiste 9-11 MARS 2017. REIMS. FACULTE DE MEDECINE ET PHARMACIE

[3] Ghebriout B., Benhadji-serradj M., Caractéristique anatomique de modèle de moulage de crânes d’hominidés. 99^ème Congrès de l’association des Morphologiste 9-11 MARS 2017. REIMS. FACULTE DE MEDECINE ET PHARMACIE

[4] Sabri M, Brahami M., Rahal S.A., Matta N., Epidemiological Knowledge Mapping since the Integrating Heterogeneous Data until the Service-Oriented Data Mining Platform, 5^th International Conference on Control Engineering &Information Technology (CEIT-2017), Sousse, Tunisia on December 17–19, 2017. http://allconferencecfpalerts.blogspot.com/2017/04/5th-international-conference-on-control.html

[5] Benarbia T., Aour B., Omari A., Labadi K., Hamci S., Electric cars-sharing modeling and analysis, Inetrnational Conference on Control, Automation and Diagnosis, (ICCAD’17), January 19-21, 2017, Hammamat, Tunisia. https://www.aconf.org/conf_87058.2017_International_Conference_on_Control,_Automation_and_Diagnosis.html

[6] Khaldi M., Mahmoudi N., Aour B., Sereir Z., Vivet A., Khelil F., Boumaiza D., Analyse micromécanique de l’interaction entre une fissure matricielle et un défaut de mouillage dans un biocomposite fibre d’alfa /resine époxy, Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017), 07-08 Mars 2017, Ghardaïa, Algérie.www.univ-ghardaia.dz

[7] Belaghit H., Aour B., M. Larabi, Modélisation et simulation numérique de l’écoulement sanguin dans l’aorte, Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017),07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[8] Keddar I. , Aour B., Fares I., Etude de l’influence de l’angle d’inclinaison du fémur et de l'épaisseur du polyéthylène sur le comportement de la prothèse totale du genou, Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017), 07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[9] Mebarki S., B. Aour, Analyse numérique du comportement biomécanique de la greffe d'une prothèse d’épaule inverse sous différents mouvements d'abduction du bras, Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017), 07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[10] Gasmi B., Aour B., Benbarek S., Influence des Microcavités sur la Répartition des Contraintes dans le Ciment Orthopédique d'une Prothèse Totale de Hanche, Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017),07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[11] Damba N., Aour B., Etude numérique de l’effet de vitesse d’impact sur le comportement des ligaments d’une unité fonctionnelle cervical C2-C3, Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017),07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[12] Oudrane A., Chesneau X., Zeghmati B., Aour B., Étude et modélisation de l’irradiation solaire globale sur un plan incliné dans le site d’ADRAR, Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017), 07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[13] Benyoub M., Bouhacina B., Aour B., BEKHECHI O., Modélisation numériques d'un échangeur de chaleur enterré vertical à tube en " U ", Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017), 07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[14] Khelil F., Aour B., Benaoum F., Numerical evaluation of fracture parameters using strain difference method, Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017), 07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[15] Boumaiza D., Aour B., Khaldi M., Etude du couplage itératif FEM-BEM pour l'analyse des problèmes de la rupture élasto-plastique, Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017), 07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[16] Aour B., Mitsak A., Bennouna M.S., Draï A., Benaoum F., Khelil F., Etude numérique de la déformation plastique des polymères au cours de l'extrusion angulaire dans des matrices à deux coudes, Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017), 07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[17] Abdelouahed E., Aour B., Benzaama H., Simulation numérique de la réparation des pipeline (API 5L X70) par patchs en composites, Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017), 07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[18] Benaoum F., Sereir Z., Aour B., Bennegadi A., Khelil F., Numerical Analysis of reinforced concrete beams pre cracked reinforced by composite materials, Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017), 07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[19] Sadek K., Fari Bouanani M., Bouiadjra B.B., Aour B., Belahcene B., Contribution to improve the resistance to propagation fissure by bonded composite patch repair in marine structure (numerical analysis), Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017),07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[20] Bennouna M.S., Aour B., Damba N., Analysis of the CGP Processing effect on polymers behavior: case of a polyamide, Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017), 07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[21] Fares I., Aour B., Keddar I., Etude de l'influence de la déchirure des ménisques et des méniscectomies sur le comportement du genou humain, Séminaire International sur l'Apport de la Simulation en Innovation Technologique (SIASIT 2017), 07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[22] Khelil F., Aour B., Benaoum F., Zengah S., Benseddiq N., Talha A., Belhouari M., Numerical evaluation of fracture parameters using a virtuel strain gage method in SENT specimen, Arab Conference on Mechanical Engineering, ARCME’17, December 10-11, 2017, Biskra University, Algeria. http://arcme-biskra.com/

[23] Aour B., Draï A., Mitsak A., Bennouna M.S., Benaoum F., Khelil F., Numerical study of plastic deformation of polymers during angular extrusion in two-elbows dies, International Conference on Technology, Engineering and Science (IConTES), October 26-29, 2017, Antalya, Turkey. http://www.2017.icontes.net

[24] Draï A., Aour B., Mitsak A., Bennouna M.S., Benaoum F., Khelil F., Finite element analysis of plastic deformation behavior of PMMA during high pressure torsion process, International Conference on Technology, Engineering and Science (IConTES), October 26-29, 2017, Antalya, Turkey. http://www.2017.icontes.net

[25] Belkorissat I., Strengthening of metallic structures using composite materials, Intarnational Workshop on Advanced Materials (IWAM 2017), 19-21 February 2017, Ras Al khaimah–UAE, http://iwam-rakcam.com/iwam-2017.html

[26] Benchenane H., La micro fluidique une science en devenir à fort potentiel applicatif. 1^stWorkshop on Micro-Electro-Mechanical Systems (MEMS) and Microfluidics, 26 April 2017, University of Science and Technology Mohamed Boudiaf Oran.

[27] Benbrahim A., Lakhdri A., Kichene M., Benchenene H., Mekkakia Maaza N., Modélisation et simulation du champ magnétique des application biomedicales. 1^stWorkshop on Micro-Electro-Mechanical Systems (MEMS) and Microfluidics, 26 April 2017, University of Science and Technology Mohamed Boudiaf Oran.

[28] M.M. Hadjiat, Hazmoune M., S. Ouali, A. Gama, M.R. Yaiche, 1^st Algerian Milti-conference on computer, electrical and electronic engineering (AMCEEE-2017), Optical analysis of a new ICS solar water heater with solar concentrator, Université des Sciences et de la Technologie Houari Boumediene Alger, algérie.

[29] Khaldi M., Mahmoudi N., Aour B., Sereir Z., Vivet A. Analyse micromécanique de l’interaction entre une fissure matricielle et un défaut de mouillage dans un biocomposite fibre d’alfa/resine époxy. 1st International Seminaire on the Apport of the Simulation in Technological Innovation, (SIASIT 2017), 07-08 Mars 2017, Ghardaïa, Algérie. www.univ-ghardaia.dz

[30] Khaldi M., Mahmoudi N., Bouziane M. M., Khelil F., Etude de l’effet de l’anhydride maléique sur les propriétés des composites alfa/polypropylène. 1^ère conférence internationale de mécanique, 14 -15 Novembre 2017. Relizane, Algérie.

[31] Bouziane M.M., Khaldi M., Benseddiq N., Zerdali M., Serier B, Experimental analysis of Implant-cement interfacial behaviour under shear mode loading conditions, 3^rd International Conference on Mechanics and Energie, December 18 – 20, 2017, Sousse, Tunisia.

[32] Mahmoudi N., Khaldi M., Benaoum A., Etude micromécanique de l’interface fibre/matrice dans le composite luffah / matrice polyster. 3^rd International Conference on Mechanics and Energie, December 18 – 20, 2017, Sousse, Tunisia.

[33] Zengah S., Aid A., Khelil F., Benguediab M., Quantification of fatigue damage under random loading of an aluminum alloy, Arab Conference on Mechanical Engineering, ARCME’17, December 10-11, 2017, Biskra University, Algeria. http://arcme-biskra.com/

[34] Baltache A., Djebli A., Boukhlif A., Khelil F., Aid A., Numerical analyses of the effet of position and size of crack on the stress intensity factor (case of plate), Arab Conference on Mechanical Engineering, ARCME’17, December 10-11, 2017, Biskra University, Algeria. http://arcme-biskra.com/

[35] Benhamena A., Khelil F., Djebli A., Fracture behavior of bolted joints under complex loading, Séminaire Internationales de Mécanique, SIM’2017, Relizane, 14-15 Novembre 2017.

[36] Khaldi M., Mahmoudi N., Bouziane M., Khelil F., Etude de l'effet de l’anhydride maléique sur les propriétés des composites alfa / polypropylene, Séminaire Internationales de Mécanique, SIM’2017, Relizane, 14-15 Novembre 2017.

[37] Mahmoudi N, Aboura A, Bouregba R, Khaldi M., Effect of surface treatment of date palm fibers on the interfacial properties of the date palm-polyester fiber composite. Séminaire internationale de mécanique. 14 -15 Novembre 2017. Centre universitaire de Relizane, Algérie.

[38] Mahmoudi N, Khaldi M., Aboura A, Bourdim M , Mechanical and thermal properties of polypropylene reinforced with doum fiber. Séminaire internationale de mécanique. 14 -15 Novembre 2017. Centre universitaire de Relizane, Algérie.

2016

[1] Hazmoune M., Aour B., Bouhallassa A., Lecheheb S., Laissaoui M., Hamidat A., 3D simulation study of a receiver on a solar power tower, 3^rd International Conference on Green Energy and Environmental Engineering (GEEE-2016), April 23-25, 2016, Hammamet, Tunisia. http://www.univ-sba.dz/images/GEEE/GEEE-poster.pdf

[2] Bloul B., Gaceb M., Harhout R., Aour B., Analysis of the influence of milling cutter with different number of teeth on the quality of the surface roughness of a work piece by the milling process, International Mechanical Engineering and Technologies Conference (MECHATEC'16) DAKAM, May 17-18, 2016, Istanbul, Turkey. http://www.dakamconferences.org/#!mechatech/slazp

[3] Benaoum F., Khelil F., B. Aour, Analyse numérique de la nocivité des contraintes thermiques sur les structures réparées par patch en matériaux composites, Workshop International de Plasturgie (WIP'1), 29 Octobre 2016, ENP Oran, Algérie. www.enp-oran.dz

[4] Draï A., Aour B., Finite element analysis of the temperature effect on deformation behavior of HDPE during HPT process, Workshop International de Plasturgie (WIP'1), 29 Octobre 2016, ENP Oran, Algérie. www.enp-oran.dz

[5] Khelil F., Aour B., Benhamena A., Benaoum F., Benzaama H., Conception et optimisation d'un nouveau type de fauteuil roulant à propulsion manuel, Workshop International de Plasturgie (WIP'1), 29 Octobre 2016, ENP Oran, Algérie. www.enp-oran.dz

[6] Aour B., Mitsak A., Bennouna M.S., Draï A., Benaoum F., Khelil F., Numerical investigation of the plastic deformation of polymers during two turn equal channel engular extrusion, 4ème Congrès International sur les Matériaux et l'Energie (CIMATEN2016), 17-19 Décembre 2016, Sousse, Tunis. https://www.agendas.ovh/le-congres-international-sur-les-materiaux-et-lenergie/

[7] Benzaama H., Bentoumi M. and Benzaama A., A new three dimensional stretching finite element method for surfaced crack propagation , Junior EUROMAT Conference, 10-14 July 2016, Lausanne Switzerland.

[8] Benhamina A., Fodil K., Benzaama H., Benseddiq N. et Amrouche A., Application d’une approche locale pour l’étude du comportement en rupture d’un matériau polymère ,Workshop International de Plasturgie (WIP'1), 29 octobre 2016, ENP Oran, Algérie. www.enp-oran.dz.

[9] Mokhtar M., Madani K., Hannani A., Benzaama H., Analyse du comportement mécanique d'un composite utilisé dans un joint à simple recouvrement en présence d'une fissure à l'interface adhésif/composite, Workshop International de Plasturgie (WIP'1), 29 octobre 2016, ENP Oran, Algérie. www.enp-oran.dz.

[10] Mokhtari M., Madani K., Hannani A., Benzaama H., Effet géométrique de longueur de recouvrement sur les contraintes de l'adhésive d'un assemblage à simple joint de recouvrement, Workshop International de Plasturgie (WIP'1), 29 octobre 2016, ENP Oran, Algérie. www.enp-oran.dz.

[11] Aminallah L., Benhamena A., Merdji A., Khelil F., Habibi S., Daikh A., Serier B., Application d'une approche locale pour l'étude du comportement en rupture d'un matériau polymère, Workshop International de Plasturgie (WIP'1), 29 Octobre 2016, ENP Oran, Algérie. www.enp-oran.dz

[12] Errouane L, Deghoul N, Sereir Z, Hadjazi K, Khaldi M., Etude de la résistance a la fissuration des plaques en l’aluminium réparées par des patchs en composites. Third International Conference on Energy, Materials, Applied Energetics and Pollution. ICEMAEP 2016, October 30-31, 2016, Constantine,Algeria.

[13] KHALDI M., Mahmoudi N, Vivet A, Bourmaud A. Analyse numérique de l’évolution de la décohésion entre matrice polymère, interphase et fibre végétale d’alfa. 37^èmes JOURNEES DU GFP SECTION GRAND OUEST 19-20 Mai 2016, Alençon, France.

[14] Ghebriout B., Moualek S., Benhadji-Serradj M., Baba-Ahmed M., Imagerie 3D de l’appareil urinaire par les nouveaux outils informatiques à partir des coupes IRM, 9^ème congrès international de l’AMOPREC, 27-28 mai 2016, Faculté de médecine d’Oran, HOTEL PHOENIX ORAN. http://www.aps.dz/sante-sciences-tech/42815-9e-congr%C3%A8s-international-sur-les-urgences-cardio-vasculaires-%C3%A0-oran

[15] Benhadji-serradj M., Chabane F., Moualek S., Ghebriout B., Baba-Ahmed M., Principe de conservation des organes anatomique par la technique de plastination, 1^ères journées internationales de chirurgie orthopédique et de traumatologique, Tlemcen le 08 et 09 mai 2016. https://www.univ-tlemcen.dz/fr/actualites/236/chirurgie-orthop-dique-et-traumatologique

[16] Benhadji-serradj M., Chabane F., Moualek S., Ghebriout B., Baba-Ahmed M., Modélisation 3D à partir de coupes anatomiques. Squelette du membre inférieur : LE FEMUR, 1^ères journées internationales de chirurgie orthopédique et de traumatologique, Tlemcen le 08 et 09 mai 2016. https://www.univ-tlemcen.dz/fr/actualites/236/chirurgie-orthop-dique-et-traumatologique

2015

[1] Mitsak A., Aour B., Analysis of HDPE behavior during 2-ECAE process using 90° and 120° Dies, 1^st International Conference on Mechanics of Complex Solids and Fluids (ICMCSF), from 17th May – 22th May, 2015, Lille, France. http://www.icmcsf.com/

[2] Fares I., Aour B., Numerical investigation of the menisectomies effect on the biomechanical behavior of the human knee, 1^st International Conference on Mechanics of Complex Solids and Fluids (ICMCSF), from 17th May – 22th May, 2015, Lille, France. www.icmcsf.com.

[3] Khelil F., Talha A., Aour B., Numerical Evaluation of Fracture Parameters Using Strain Difference Method, 1^st International Conference on Mechanics of Complex Solids and Fluids (ICMCSF), from 17th May – 22th May, 2015, Lille, France. www.icmcsf.com.

[4] Damba N., Aour B., Finite element investigation of the moment loading effect on the capsular and anterior ligaments of the cervical spinal unit C1-C2, 15^th International Conference on New Trends on Fatigue and Fracture (NT2F15), October 20-23 2015, Oran, Algeria. www.icmcsf.com.

[5] Draï A., Aour B., Analysis of the temperature effect on the behavior of polymers during high pressure torsion process, 15^th International Conference on New Trends on Fatigue and Fracture (NT2F15), October 20-23, 2015, Oran, Algeria. www.icmcsf.com.

[6] Mitsak A., Aour B., A numerical modeling of HDPE behavior during 2-ECAE process using 120° die, 15^th International Conference on New Trends on Fatigue and Fracture (NT2F15), October 20-23, 2015, Oran, Algeria. www.nt2f.com.

[7] Mitsak A., Aour B., A numerical modeling of HDPE behavior during 2-ECAE process using 120° die, 15^th International Conference on New Trends on Fatigue and Fracture (NT2F15), October 20-23, 2015, Oran, Algeria. www.nt2f.com.

[8] Gasmi B., Aour B., Benbarek S., Stress analysis in total hip replacement in different orientations of the implant, 15^th International Conference on New Trends on Fatigue and Fracture (NT2F15), October 20-23, 2015, Oran, Algeria. www.icmcsf.com.

[9] Aour B., Boumaiza D., Investigation of the interface relaxation FEM-BEM for elasto-plastic fracture analysis, 15^th International Conference on New Trends on Fatigue and Fracture (NT2F15), October 20-23, 2015, Oran, Algeria. www.icmcsf.com.

[10] Fares I., Aour B., Finite element analysis of the different cracking meniscus of a human knee, 15^th International Conference on New Trends on Fatigue and Fracture (NT2F15), October 20-23, 2015, Oran, Algeria. www.icmcsf.com.

[11] Keddar I., Aour B., Biomechanical study of a total knee prosthesis, 15^th International Conference on New Trends on Fatigue and Fracture (NT2F15), October 20-23, 2015, Oran, Algeria. www.icmcsf.com.

[12] Bennouna M.S., Aour B., Numerical and experimental investigation of mechanical properties of a polyamide after constrained groove pressing process, 15^th International Conference on New Trends on Fatigue and Fracture (NT2F15), October 20-23, 2015, Oran, Algeria. www.icmcsf.com.

[13] Bentahar M., Benzaama H., Stretching FEM 2D crack Propagation, International Conference on Mechanics of Complex Solids and Fluids (ICMCSF) Lille, France , 17-22 May 2015. http://www.icmcsf.com/

[14] Benzaama H., Study of a micro-climate of agricultural greenhouse", SIPE 12, 12^ème Séminaire International sur la physique Energétique, 23-25 février 2015. www.univ-bechar.dz.

[15] Khelil F., Aour B., Belhouari M., Hadj meliani M., The numerical evaluation of fracture parameters using a virtual strain gage method, 15^th International Conference on New Trends on Fatigue and Fracture (NT2F15), October 20-23 2015, Oran, Algeria. www.nt2f.com.

[16] Aour B., Boumaiza D., Investigation of the interface relaxation FEM-BEM for elasto-plastic fracture analysis, 15^th International Conference on New Trends on Fatigue and Fracture (NT2F15), October 20-23 2015, Oran, Algeria. www.nt2f.com.

[17] Meddeber W., Aour B., Analyse des effets de gradient en fatigue des biomatériaux dentaires, 15^th International Conference on New Trends on Fatigue and Fracture (NT2F15), October 20-23, 2015, Oran, Algeria. www.nt2f.com.

[18] Ouali S., Hazmoune M., Bouzidi K., Low temperature geothermal energy for rural development. European conference on renewable energy systems, Antalya, TURKEY, 07-10 Oct. 2015. https://www.researchgate.net/publication/

[19] Laissaoui M., Bouhallassa A., Lecheheb S., Hazmoune M., Simulation d’une tour solaire à concentration par sam. 2^ème séminaire international sur le génie climatique et l’énergétique, nouvembre 09-11/ 2015. Université de mentouri constantine.

[20] Laissaoui M., Nehari D., Bouhallassa A., Lecheheb S., Mammar M., Hazmoune M., Analysis of combined CSP-MED desalination in algeria. 3^rd internationnal renewable and sustainable energy conference, Decembre 10-13 /2015 Marrakech, ouarzazate, Morocco.

[21] Lecheheb S., Bouhalassa A., Laissaoui M., Hazmoune M. and Bouaichaoui S., Numerical modeling of heat exchanges through the molten salts cavity receiver. Young Scholars’ Forum and EWACC Building Bridges, June 07-18, 2015, Cyprus Institute, Nicosia-Cyprus.

[22] Lecheheb S., Bouhallassa A., Laissaoui M., Mammar M., Bouaichaoui S., Hazmoune M., Hamidat A., Numerical modeling and performance optimization study of a cavity receiver in solar tower. 7^th International Exergy, Energy and Environment Symposium. April 27-30, 2015, valencienne France.

[23] Sadek K., Bennouna M.S., Aour B., Study of the mechanics of fatigue by heat ageing of the aluminum alloy A5086, 15^th International Conference on New Trends on Fatigue and Fracture (NT2F15), October 20-23, 2015, Oran, Algeria. www.nt2f.com.

[24] Belahcene B., Doghmane Z, Sadek K., Investigation on Corrosion Behavior of steel HLE under the Effect of Hazardous Components (CO₂), 15^th International Conference on New Trends on Fatigue and Fracture (NT2F15), October 20-23, 2015, Oran, Algeria. www.nt2f.com.

[25] Brahami M., Matta N., & Semaoune K. ,Towards a model to reduce the Risk of Projects guided by the Knowledge Management Process – Application on FERTIAL, 7th International Conference on Knowledge Management and Information Sharing (KMIS’15), 12-14 November 2015, Lisbon, Portugal, Proceeding of the 7^th International Joint Conference on Knowledge Discovery, Knowledge Engineering, and Knowledge Management, 98-105. DOI:10.5220/0005581500980105; ISBN: 978-989-758-158-8

[26] Brahami M., Semaoune K., & Benziane A., Communication in the 2^nd. International Conference on Education, intituled “Vers une relation entre la capitalisation des connaissances et le processus d’innovation : Application dans le système éducatif”, Interuniversity Research Center on Training and Teaching Profession (CRIFPE), April 30 and May 01, 2015, Montreal, Canada.

[27] Brahami M., Matta N., & Semaoune K., Communication in the Framework of International Conference on Information Systems and Economic Intelligence (SIIE’2015), Entitled “The Relationship between Knowledge Management and Innovation process in FERTIAL company”, February 12, 13 and 14. 2015 in Hammamet (Tunisia).

[28] Brahami M., Matta N., & Semaoune K., Communication in the framework of 6th. International Conference on Information Systems and Economic Intelligence (SIIE’2015), Entitled “Integration of the knowledge management process into risk management process – Moving towards actors of project approach”, February 12 ^th., 13^th. & 14 ^th. 2015 in Hammamet (Tunisia).

2014

[1] Damba N., Aour B., Contribution to bio-faithful modelling of the C5-C6 cervical segment behavior under different loadings, 3^ème Conférence Internationale sur les Matériaux et les Structures en Composite, 02-03 Décembre 2014, Oran, Algérie. http://www.univ-usto.dz/

[2] Benzaama H., Study of a Climate Greenhouse Heating, Application to Agricultural Field, Conference Euro-méditeranéennne sur la télégestion, Environnement durable TEDD'14, 19-20 octobre 2014, ENP Oran, Algérie. http://www.enp-oran.dz/

[3] Mitsak A., Aour B., Numerical Investigation of HDPE behavior during two-ECAP Process with 120° Die, 3^ème Conférence Internationale sur les Matériaux et les Structures en Composite, 02-03 Décembre 2014, Oran, Algérie. http://www.univ-usto.dz/

[4] Meddeber W., Aour B., Belkahla N., Etude comparative des comportements des biomatériaux dentaires, 3^ème Conférence Internationale sur les Matériaux et les Structures en Composite, 02-03 Décembre 2014, Oran, Algérie. http://www.univ-usto.dz/

[5] Khelil.F., Benaoum F.,Belhouari M., Evaluation of the stress intensity factor using the strain defference method, 3ème Conférence Internationale sur les Matériaux et les Structures en Composite, 02-03 Décembre 2014, Oran, Algérie. http://www.univ-usto.dz/

[6] Khelil F., Belhouari M., Aour B., Benaoum F., Benhamena A. , A new fem approach for the determination of fracture parameters in a cracked material, Advances in Materials & Processing Technology Conference Atlantis The Palm, November 17-20, 2014, Dubai, United Arab Emirates. http://10times.com/ampt2014

[7] Ghebriout B., Moualek S., Baba-Ahmed M. , Uhl J-F, Delmas V., Les nouveaux outils informatiques pour la dissection anatomique virtuelle du corps humain. 96^ème Congrès de l’association des morphologistes, 20-22 mars 2014, Amiens, France. http://www.morphologistes.fr/2014/

[8] Moualek S., Ghebriout B., Taibi A., Conservation des coupes anatomiques du cerveau par la technique de plastination, 96^ème Congrès de l’association des morphologistes, 20-22 mars 2014, Amiens, France. http://www.morphologistes.fr/2014/

[9] Uhl J-F, Ghebriout B., Chahim M., Delmas V., Les nouveaux outils numériques pour l’enseignement et la recherche en anatomie. 96^èmeCongrès de l’association des morphologistes, 20-22 mars 2014, Amiens, France. http://www.morphologistes.fr/2014/

[10] Zanoun A., Beladjine S., Amrani M., Vergoten G., Validation d'un modèle théorique AB4 de l’eau pour les simulations des macromolecules biologiques, Humboldt-kolleg, International Conference on Theory and Computation in Sciences and Bio-sciences TCSBS 14, Tlemcen, November 16-18, 2014.

[11] Zanoun A., Bendaoud M., Numerical simulation of the thermo-chemical boronizing of XC38 steel), Colloque International sur le monitoring des systems industriels (CIMSI 2014) MARAKECH 2014.

[12] Laissaoui M., Bouhallassa A., Lecheheb S., Mammar M., Hazmoune M., Hamidat A., Analysis of solar thermal power plant in Algeria, Entech.14, Energy technologies conference, 22-24 dec 2014. Istanbul.

[13] Brahami M., Semaoune K., & Benziane A., Communication in the framework of 5^th Management colloquium of Organizational Technologies (MTO’2014), Entitled “Towards a knowledge-sharing mechanism via digital networks guided by communities of practice and knowledge mapping: case of ATM Mobilis - Algeria, October, 2nd & 3rd. 2014, School of Mines of Ales, Nimes, France.

[14] Brahami M., Semaoune K., & Benziane A., Communication in the framework of 4th International Conference on Leadership, Technology, Innovation and Business Management (ICLTIBM’14), Entitled “Towards a new approach of support innovation guided by knowledge management: Application on FERTIAL”, November 20-22, 2014 Istanbul-Turkey.

2013

[1] Aour B., Boumaiza D., Khelil F., Rahmani O., Proposition d'une méthode de couplage FEM-BEM pour l'analyse des problèmes d'élastoplsaticité, 1^er Séminaire International de Génie Civil, 06-07 Mars 2013, Bechar. www.univ-bechar.dz.

[2] Khelil F., Aour B., Etude de l’effet des paramètres de rupture sur le comportement d’un matériau fissuré, 1^er Séminaire International de Génie Civil, 06-07 Mars 2013, Bechar. www.univ-bechar.dz.

[3] Boumaiza D., Aour B., On the effectiveness of the coupling FEM-BEM approach for solving the elasto-plastic problems, International Conference on Modeling, Simulation and Optimization (ICMSO), April 28 – 30, 2013 Hammamet, Tunis. www.icmsao.org.

[4] Benzaama H., Benzaama A., Aour B., A Three dimensional stretchjing finite element method for crack propagation: Application to fretting fatigue, Materials Science & Technology Conference and Exhibition, (MS&T13) October 26-31, 2013 Montréal, QC, Canada, 2013, http://www.matscitech.org/

[5] Aour B., Boumaiza D., Khelil F., Rahmani O., On the effectiveness of the coupling FEM-BEM approach for solving the elasto-plastic problems, 1^er Séminaire International de Génie Civil, 06-07 Mars 2013, Bechar. www.univ-bechar.dz.

[6] Ghebriout B., Moualek S., Taibi A., Baba-Ahmed M., La plastination : nouvelles technique de conservation des pièces anatomiques. 95^ème Congrès de l’association des morphologistes, 14-16 mars 2013, Marseille, France. http://www.morphologistes.fr/2013/

[7] Oudrane A. et al., Méthodologie pour le dimensionnement de l’écartement optimal de la chaîne tubulaire du PSD,The Second International Conference on Energy and Sustainable Development February 19th – 20th, 2013, Adrar, Algeria, "ICESD’13".http://www.univ-tiaret.dz/newsViewer.php?idNews=12282

[8] Oudrane A. et al., L'épaisseur optimale de la dalle chauffante dans un de plancher solaire direct
disposer à Adrar, The Second International Conference on Energy and Sustainable Development February 19 - 20, 2013, Adrar, Algeria, "ICESD’13".http://www.univ-tiaret.dz/newsViewer.php?idNews=12282