headerimage
LABAB website

2026

[1] Houari H., Aour B., Ramtani S.,Benalia F., Barboura S., Numerical and experimental Study of the behavior of a polyamide during the ECAE process using a 105° die, Fracture and Structural Integrity, 76 ,(2026), 238-264. DOI https://doi.org/10.3221/IGF-ESIS.76.15

2025

[1] Hazmoune M., Debbache M., Osman M.G., Aour B., Panait C., Laissaoui M., & Lazaroiu G., Modeling and Efficiency Analysis of an Immersed Heat Exchanger for Solar-Powered Industrial Heat Processes: A Case Study on Wool Washing. Technologies, 13(7), 308, (2025). https://doi.org/10.3390/technologies13070308

[2] Osman M.G., Lazaroiu G., Shadia Abdeldaim H., Hazmoune M., Debbache M., Dorel Stoica,
Analysis of Photovoltaic Systems with Battery Storage, Electric Vehicle Charging, and Smart Energy Management, Sustainability 2025.

[3] TahariA., Zaim A.N., Ould Chikh E.B, Khaldi M, Boudjellel Moulai A., Chekhar N., Effects of Polypropylene on the Mechanical and Physical Properties of Recycled HDPE Composites with 20% CaCO3.  Journal of Pipeline Systems Engineering and Practice (2025).

2024

[1] Daikh A.A., Drai A., Belarbi M.O., Houari M.S.A., Aour B., Eltaher M.A.,Norhan A.M., Static bending response of axially randomly oriented functionally graded carbon nanotubes reinforced composite nanobeams, Advances in Nano Research, Vol. 16, N 3 (2024), pp 289-301. https://doi.org/10.12989/anr.2024.16.3.289
[2] Gasmi B., Aour B., Benbarek S., Talha A., Analysis of the Fracture Behavior of Orthopedic Cement Using Submodeling Technique, Journal of Biomimetics, Biomaterials and Biomedical Engineering, 2024 ,ISSN: 2296-9845, Vol. 64, pp 21-38. https://doi.org/10.4028/p-io8hnF
[3] Benyoub M., Aour B., Oudrane A., Sadek K., Numerical Investigation of the Coaxial Geothermal Heat Exchanger Performance, International Journal of Engineering Research in Africa (2024), ISSN: 1663-4144, Vol. 69, pp 71-90. https://doi.org/10.4028/p-6ovleZ.

[4] Meddeber W., Aour B., Labadi K., Smart wheelchair localization and navigation based on multi-sensor data fusion using hybrid-filter method (HF). Revue d'Intelligence Artificielle, Vol. 38, No. 2, (2024), pp. 387-396. https://doi.org/10.18280/ria.380202.

[5] Guerroudj M.,  Drai A., Daikh A.A., Houari M.S.A., Aour B., Eltaher M.A.M., Belarbi M.O., Size-dependent free vibration analysis of multidirectional functionally graded nanobeams via a nonlocal strain gradient theory, Journal of Engineering Mathernatics (2024) 146:20,            https://doi.org/l0.1007/s10665-024-10373-z

[6] Bloul B., Aour B. Harhout R., Automation of three-dimensional inspection using the iterative closest point algorithm: application to a gas turbine blade, International Journal of Advanced Manufacturing Technology, (2024), https:J/doi.org/l0.l007/500170-024-13866-4

[7] Benbrahim A., Benchenane H., Hammar S., Aour B., Numerical investigation of planar microcoils integrated in microfluidic devices for biological applications. Microsystem Technologies, (2024). https://doi.org/10.1007/s00542-024-05674-3.

[8] Oudrane A., Hamouda M., Aour B., Damba, N., Belarbi R., Case study of the modeling and analysis of heat transfer in a desert habitat, Studies in Engineering and Exact Sciences, Curitiba, ISSN: 2664-0981,  v.5, n.2, p.01-24, 2024,  DOI: 10.54021/seesv5n2-035.

[9] Abdelouahed E., Sadek K., Aour B., Benzaama H., Bennouna M.S., Mokhtari M., Numerical Finite Element Analysis of Cracked Stainless-Steel Pipe Repaired by GFRP in a Moist Environment, International Journal of Engineering Research in Africa (2024), ISSN: 1663-4144, Vol. 70, pp 1-18. https://doi.org/10.4028/p-pOIx1c.

[10] Oudrane A., Hamouda M., Aour B., Chesneau, X., Zeghmati B., Modeling a poiseuille flow through a rectangular pipe in a floor slab (PSD), Studies in Engineering and Exact Sciences, Curitiba, ISSN: 2664-0981,  v.5, n.2, p.01-22, 2024,  DOI: 10.54021/seesv5n2-077.

[11] Damba N, Djaber A., Aour B., Oudrane A., Lamsadfa S.,  Biofuel Production from Cooking Oil and its Physicochemical Properties, Studies in Engineering and Exact Sciences, Curitiba, ISSN: 2664-0981, v.5, n.2, pp 01-21, 2024,  DOI: 10.54021/seesv5n2-116.

[12 ] Drai A., Aour B., Daikh A.A., Talha A., Eltaher A., Modeling and finite element simulation of polypropylene behavior under severe plastic deformation by high‑pressure torsion, Journal of the Brazilian Society of Mechanical Sciences and Engineering (2024), pp……….., https://doi.org/10.1007/s40430-024-05143-y. 

[13]Belarbi B., Bennouna M.S., Sadek K., Aour B., Abdelouahed E., Bachir Bouiadjra B.A., Talha A., Effect of the influence of the different corrosion level on the repair efficiency of marine and offshore structures by bonded composite, Journal of Theoretical and Applied Mechanics, Sofia, Vol.54 (2024) pp. 308-322

[14] Oudrane A., Aour B., Damba N., Hamouda M., Belarbi  R., Numerical Analysis of the Spread of Solar Radiation Flux Across Multiple Walls for a Living Area in Adrar Region, International Journal of Engineering Research in Africa, ISSN: 1663-4144, Vol. 72, pp 71-96.  2024.

[15]  Boumaiza D., Sadek K, Aour B. and Poncet S., Application of machine learning for predicting adhesive damage used for joining structural steel with GFRP under hygrothermal effect, Journal of Composite Materials, 2024, Vol. 0(0) 1–19. DOI: 10.1177/00219983241310556

[16]  Drai A., Aour B., Daikh A.A., Talha A., Eltaher A., Static bending response of axially randomly oriented functionally  graded carbon nanotubes reinforced composite nanobeams, Advances in Nano Research, Vol. 16, No. 3, 2024,  289-301,  https://doi.org/10.12989/anr.2024.16.3.289. 

2023

[1] Oudrane A., Aour B., Zeghmati B., Balti J. Numerical Investigation of Fluid-                   Structure, Thermal Coupling for a Heated Slab.Advances in Systems Science and Applications , 23(1), 99-114. https://doi.org/10.25728/assa.2023.23.01.1001.
[2] Damba N., Aour B., Oudrane A., Lamsadfa S., Numerical Modeling of the Capsular Ligament Failure for the C2-C3 Segment in the Case of a Frontal Impact, Journal of Biomimetics, Biomaterials and Biomedical Engineering, ISSN: 2296-9845, Vol. 60, pp 69-81, 2023, doi: 10.4028/p-3td39z. https://www.scientific.net/JBBBE.60.69.
[3] Drai A., Daikh A.A., Belarbi M.O., Hamdi A., Eltaher M.A., Bending of axially functionally graded carbon nanotubes reinforced composite nanobeams. Advances in Nano Research, 2023, 14(3), pp. 211–224. https://doi.org/10.12989/anr.2023.14.3.211
[4] Daikh A.-A., Belarbi, M.O., Drai, A.,Tounsi, A., Eltaher, M.A.Static analysis of functionally graded plate structures resting on variable elastic foundation under various boundary conditions.  Acta Mechanica, 2023, 234(2), pp. 775–806. https://doi.org/10.1007/s00707-022-03405-1
[5] Belkorissat I., Ameur M.n Influence of an initial imperfection on hygro-thermo-mechanical behaviors
of FG plates laid on elastic foundation. J Mech Sci Technol, vol 37, pp 2471–2477, 2023.
[6]  Moulai-Khatir D., Mokhtari M., Slamene A., Abdelouahed E.A., Benzaama H., & Nadji L., Using XFEM technique to predict the crack growth in the notched plate under high loading cyclic conditions, Mechanics of Advanced Materials and Structures,  October 2023, DOI :10.1080/15376494.2023.2269650.
[7]  Gouasmi S., Mokhtaria M., Slamene A., Hamza B., Benzaama H., Abdelouahed E.A., & Nadji L., Sensitivity analysis of GTN damage parameters : Application to notched plate ductile fracture simulation , Mechanics of Advanced Materials and Structures, October 2023, DOI :10.1080/15376494.2023.2267290
[8] Messabih F.Z., Mokhtari M., Bentoumi M., Slamene A., Abdelouahed E.A., Benzaama H., GHomari A. & Merasli Y., Nonlinear CZM-based predictive analysis of damage in single-lap composite joints : An exploration of the FGM concept in Fiber–Matrix coupling, Mechanics of Advanced Materials and Structures,October 2023, DOI : 10.1080/15376494.2023.2263974.
[9]  Benzaama A., Mokhtari M.,Ahmed-Bouziane N.E.I., Abdelouahed E.A., Benzaama H., Ghermaoui M.A.I. & Aliane I., Using a UMM-XFEM technics to predict the damage in CFRP bi-graded with glass-epoxy materials of notched plate under quasi-static loading, Mechanics of Advanced Materials and Structures, September 2023, DOI : 10.1080/15376494.2023.2244958.
[10] Abdelouahed E.A.,Mokhtari M.,Benzaama H., Ghermaoui M.A.I. ,Ezzine M.C., Ghomari A. & Merasli Y., Using a non-linear mixed model behavior of CZM to predict the damage in single lap bonded joint with Bi-composite graded materials, Mechanics of Advanced Materials and Structures, August 2023, DOI : 10.1080/15376494.2023.2243604
[11] Ghermaoui I.M.A., Mokhtari M., Benzaama H., & Abdelouahed E.A., Using FGM concept and combined of XFEM-CZM technics to predict the damage in carbon/carbon-epoxy graded composites, Mechanics of Advanced Materials and Structures, August 2023, DOI : 10.1080/15376494.2023.2245830
[12]  Telli F., Mokhtari M., Khiari M.A. , Benzaama H., Slamene A. and Abdelouahed E.A., Damage analysis of hybrid carbon/Glass-Epoxy pipe elbows under bending and pressure loading. Mechanics of Advanced Materials and Structures ,  June 2023,DOI : 10.1080/15376494.2023.2226953.
[13]  Telli F., Mokhtari M., Abdelouahed E.A.,Benzaama H.,Khedim K., Using FGMConceptto Predictthe Damage ofHeat Treated ElbowsUnderBending and Pressure Loading. Journal of Pressure Vessel Technology April 2023, 1-15.
[14]  Abdelaziz B., MokhtariM., Benzaama H., Samet K., Benrouba H.,and Abdelouahed E.A.,Using XFEM Technique to Predict the Effect of Default on the Damage of Steel Pipe Reduced-Connection Under Bending and Pressure Loading.” International Journal of Steel Structures February 2023, no. 1 : 316-330
[15] Bentahar M., all., Fatigue Analysis of an Inclined Crack Propagation Problem by the X-FEM Method, International Journal of Applied and Structural Mechanics(IJASM), 2023, https://doi.org/10.55529/ijasm.34.23.31.
[16] Bentahar M., all., ALLDMD Dissipation Energy Analysis by the Method Extended Finite Elements of a 2D Cracked Structure of an Elastic Linear Isotropic Homogeneous Material, Journal of Electronics, Computer Networking and Applied Mathematics, 2023,https://doi.org/10.55529/jecnam.32.1.8.
[17] Bentahar M., all., Numerical study of a centred crack on an elastoplastic material by the FEM method, Tribology and Materials, 2023, https://doi.org/10.46793/tribomat.2023.011.
[18] Gasmi B.,Sahli A., Benbarek S., Aour B., Initiation and propagation of a crack in the orthopedic cement of a THR using XFEM . Advances in Computational Design, Vol. 4, No. 3 (2019) 000-000 DOI: https://doi.org/10.12989/acd.2019.4.3.00, Etude du comportment en rupture du ciment orthopédique par la technique du submodel. 2023
[19] Brahami M., Abdallah El Hadj M. I. & Matta N., Android Malware Detection Approach Using Stacked AutoEncoder and Convolutional Neural Networks. International Journal of Intelligent Information Technologies (IJIIT), 2023, 19(1), pp 1-22. https://doi.org/10.4018/IJIIT.329956
[20] Belaghit A., Aour B., Benchenane H., Larabi M.,Hemodynamic assessment of aortic stent graft implantation using computational fluid dynamics (CFD), Series on Biomechanics, Vol.37, No.4 (2023), 27-38 DOI: 10.7546/SB.04.04.2023

2022

[1] Boumaiza D., Aour B., On the Effectiveness of the Iterative Coupling FEM–BEM for the Analysis of the Problems with Elastoplastic Failure Behavior. J Fail. Anal. and Preven. 2022. https://doi.org/10.1007/s11668-022-01390-0.
[2] Sabri M., Brahami M., & Abid Faten F.Z., Sentiment Analysis of COVID-19 Tweets Using Adaptive Neuro-Fuzzy Inference System Models. International Journal of Software Science and Computational Intelligence (IJSSCI), 14(1), 1-20, (2022),http://doi.org/10.4018/IJSSCI.300361
[3] Brahami M., Dermane Z., Kebir N.H., Sabri M., Matta N., Coronavirus Pneumonia Classification using X-Ray and CT Scan Images with Deep Convolutional Neural Networks Models. Journal of Information Technology Research (JITR), 15(3), 1-23,2022, DOI: https://doi.org/10.4018/JITR.299391
[4] Brahami M., Kebir N.H., Dermane Z., Sabri M., Matta N., Detection and Classification of Brain Tumors from MRI Images Using a Deep Convolutional Neural Network Approach. International Journal of Software Innovation (IJSI), 10(1), 1-25. 2022, DOI: http://doi.org/10.4018/IJSI.293269.
[5] Brahami M., Abdeldjouad F. Z., Sabri M., Multi-Class Sentiment Classification for Healthcare Tweets Using Supervised Learning Techniques. International Journal of Service Science, Management, Engineering, and Technology (IJSSMET), 13(1), 1-23. 2022, DOI: http://doi.org/10.4018/IJSSMET.298669
[6] Brahami M., Abdeldjouad F. Z., Sabri M., Semaoune K., Matta N., Forecasting Supply Chain Demand Approach Using Knowledge Management Processes and Supervised Learning Techniques. International Journal of Information Systems and Supply Chain Management,15(1), 1-21. 2022, DOI: http://doi.org/10.4018/IJISSCM.2022010103
[7] OUDRANE A., AOUR B., HAMOUDA M., The Implementation of Numerical Codes for the Analysis of Solar Flux Inputs and the Optimization of Thermal Comfort for a Monobloc Habitat, European Journal of Computational Mechanics, Vol. 31 2, pp 155–196. 2022, doi: 10.13052/ejcm2642-2085.3121.
[8] Brahami M., Dermane Z., Kebir N. H., & Matta N., Diabetic Retinopathy Classification Using Hybrid Deep Learning Approach. SN Computer Science, 3(5), 1-15.2022, https://doi.org/10.1007/s42979-022-01240-8
[9] Brahami M., Sabri M., Matta N.,  The Impact of Business Intelligence and Knowledge Management on Sustainability Performance Among Tourism Industry in Algeria, Indonesian Journal of Sustainability Accounting and Management, 6(1), 1-24. 2022, DOI: https://doi.org/10.28992/ijsam.v6i1.550
[10] Abdeldjouad F., Brahami M., & Matta N., A Hybrid Approach for Heart Disease Diagnosis and Prediction Using Machine Learning Techniques. In. Jmaiel M., Mokhtari  M., Abdulrazak B., Aloulou H., & Kallel S. (Eds.). Book Title: The Impact of Digital Technologies on Public Health in Developed and Developing Countries. Proceedings of 18th International Conference On Smart Living and Public Health
(ICOST'20), Lecture Notes in Computer Science, vol. 12157, Springer-Verlag, 299-305.

[11] Keddar B., Aour B., Zahaf S., Comparative Study of the Fractured Humerus Fixation by Intramedullary Nailing and Compression Plate, J Fail. Anal. and Preven. (2022).

 https://doi.org/10.1007/s11668-022-01459-w.

[12]  DAHBI A., Benmedjahed M., Khelfaoui A., Aoun N., Harrag A., Bouraiou A., Benlahbib B., Kadi S., Slimani A., Ammar N., Chogueur D., Mouhadjer S., Hamouda M. , Tidjar B., OUDRANE A., Kadri A.Y.,  Belhadj Z.,  ‘’ A Comparative study between MPPT using PI and Fuzzy Logic Control for Wind Turbine system’’. 2022,19th International Multi-Conference on Systems, Signals & Devices (SSD'22). 978-1-6654-7108-4/22/$31.00©2022 IEEE | DOI: 10.1109/SSD54932.2022.9955879.
[13] Oudrane A., Aour B., Hmouda M., Damba N.and Benyoub M.,  Improvement of a Computer
Tool for the Different Modes Optimization of Heat Transfer in a Monobloc House''. Journal
des énergies renouvelables et de la technologie des réseaux intelligents, vol.17, No.2, Juillet
Décembre 2022. PP.16-34. https://ph01.tci-thaijo.org/index.php/RAST/article/view/249714/170175
[14] BENTAHAR M., BENZAAMA H., Numerical Simulation of 2D Crack Propagation using SFEM Method by Abaqus, Tribology and Materials, https://doi.org/10.46793/tribomat.2022.018 
 

2021

[1] Oudrane A., Aour B., Hamouda M., Numerical Investigation of Fluid-Structure Thermal Coupling under the Transient Flow Effect, International Journal of Engineering Research in Africa 2021, ISSN: 1663-4144, Vol. 54, pp 132-146, doi: 10.4028/www.scientific.net/JERA.54.132.

[2] Chemmami A., Aour B., Zahaf S., Dahmane M., Bekkar I., Mehdi G., Boutchicha D., Biomechanical comparison of three total artificial discs: sb-charite iii®, prodisc-l® and maverick® reinforced by a posterior fixation system in the spinal column: a three-dimensional finite element analysis, StructuraL Integrity and Life,  Vol. 21, No.1 (2021), pp. 65-83, 

http://divk.inovacionicentar.rs/ivk/ivk21/OnlineFirst.html.
[3] Belaghit A., Aour B., Larabi M., Tadjeddine A. A., Mebarki S., Numerical study of hemodynamics after stent implantation during the cardiac cycle, Journal of Mechanical Engineering and Sciences (JMES), Vol. 15, Issue 2,8016-8028.DOI: https://doi.org/10.15282/jmes.15.2.2021.07.0632

[4] Bloul B., Chanal H., Aour B., Chtioui N., Study of geometrical defects of free-form surface machined using neural network, Advances in Mechanical Engineering, 2021, Vol. 13(11) 1–12,

 https://doi.org/10.1177/16878140211060973.
[5] Bentahar M., Benzaama H. and Noureddine Mahmoudi, Numerical modeling of the contact effect on the parameters of cracking in a 2D Fatigue Fretting Model, Frattura ed Integrità Strutturale,15 (57), 182-194, June 2021. DOI: 10.3221/IGF-ESIS.57.15
[6] Hamadi N., Mokhtari M., Benzaama H. and Abdelouahed E., Using XFEM to Predict the Damage with Temperature of the Steel Pipe Elbows under Bending and Pressure loading, 2021, Frattura ed Integrità Strutturale, 15(55):345-359.
[7] Hamadouche F., Benzaama H., Mokhtari, M. and Miloud T. A., Influence of contact parameters in fretting-fatigue contact 3D problems, January 2021, Frattura ed Integrità Strutturale 55(2021):228-240. DOI: 10.3221/IGF-ESIS.55.17
[8] Bentahar M., Benzaama H. and Mahmoudi N., Numerical Modeling Of The crack propagation ForThe Evolution Of The Strain Energy Allse Of The Crack Propagation By The X-Fem Method. Revue des Matériaux et Energies Renouvelables 5 (2), 24-31, November 2021. https://www.asjp.cerist.dz/en/article/167392
[9] Litim S.A., Benzaama H., Hamel M., Hamidou M.K., Debab A., , Performances evaluation and blade number optimization of radial inflow turbine, International Journal Of Advanced Research In Engineering And Technology (IJARET)  Volume 12, Issue 11, pp 85-97, November 2021. DOI: 10.17605/OSF.IO/MHWPA
[10]  Benchouche W., Rabah M., Bennouna M.S., The Impact of the Dynamic Model in Feedback Linearization Trajectory Tracking of a Mobile Robot, (sept. 2021), Periodica Polytechnica Electrical Engineering and Computer Science, https://doi.org/10.3311/PPee.17127
[11] Adamou Y. , Korichi M., Elabed D., Bennouna M.S., Chemical Analysis and Optimization of the Extracting Process of Essential Oil of Ridolfia segetum, Phytothérapie, (2021),  DOI 10.3166/phyto-2021-0256, © Lavoisier SAS 2021.
[12] Hammadi N., Mokhtari M., Benzaama H., Madani K., Brakna A., Abdelouahed E.A., Using XFEM to Predict the Damage with Temperature of the Steel Pipe Elbows under Bending and Pressure loading. Frattura ed Integrità Strutturale, 15(55), pp.345-359, 2021, DOI: 10.3221/IGF-ESIS.55.27
[13] Halati M.S, Benchenane H., Bouslama M., Mokadem A., Ouerdane A., Bedjaoui A.H., Bouhemadou A.M., Guezzoul M., Kharoubi B., Mahfoud A.K., Benmohktar K., Bensassi, Baizid A.H., . Electronic and optical properties of ZnSe by theoretical simulation TB-mBJ (Tran-Blaha modified Becke Johnson) associated to analysis techniques XPS (X-Ray Photoelectron Spectroscopy); REELS (Reflective Electron Energy Loss Spectroscopy) and PLS (Photoluminescence Spectroscopy). Applied Surface Science 566 (2021) 150690. https://doi.org/10.1016/j.apsusc.2021.150690
[14] Baizid A., Mokadem A., Ouerdane A., Guezzoul M., Bouslama M., Benchenane H., Kharroubi B., Bedrouni M., Mahfoud A.K., Benmokhtar Bensassi K., Halati M.S., First principles calculation of structural, electronic and optical properties of K-doped ZnO. Computational Condensed Matter (2021) pp. e00558. https://doi.org/10.1016/j.cocom.2021.e00558
[15] DebbacheM., M., Hazmoune M., Derfouf, S., Ciupageanu, D. A., & Lazaroiu, G. Wind Blade Twist Correction for Enhanced Annual Energy Production of Wind Turbines, 2021. Sustainability, 13(12), 6931.
[16] HAZMOUNE M., LAZAROIU G., Dana-Alexandra CIUPAGEANU, DEBBACHE M.,Comparative study of airfoil profile effect on the aerodynamic performance of small scale wind turbines 2021 IEEE.
http://www.scopus.com/inward/record.url?eid=2-s2.0-85106758153&partnerID=MN8TOARS
[17] Daikh A. A., Drai A., Bensaid I., Sid Ahmed Houari M. and Tounsi A, On vibration of functionally graded sandwich nanoplates in the thermal environment, Journal of Sandwich Structures & Materials. 2021, Vol. 23(6) pp 2217–2244. https://doi.org/10.1177/1099636220909790
[18] Brahami M.,  Semaoune K., Belayachi M.A., Benslimane A., The Role of Drop Shipping in E-Commerce: The Algerian Case. International Journal of E-business Research (IJEBR),17(4), 54-72. 2021, DOI:http://doi.org/10.4018/IJEBR.2021100104

2020

[1] Bennouna M.S., Sadek K., Aour B., Damba N., Numerical investigation of the effect of constrained groove pressing process on the mechanical properties of polyamide PA66, Frattura ed Integrità Strutturale, 51 (2020), pp.254-266;DOI:10.3221/IGF-ESIS.51.20.
[2] Khaldi M., Bouzine M.M., Vivet A., Bougherara H., About the influence of temperature and environmental relative humidity on the longitudinal and transverse mechanical properties of elementary alfa fibers, Applied Polymer Science,pp.1-9, 2020 ,https://doi.org/10.1002/app.48992
[3] Drai A., Aour B., Belayachi N., Talha A., Benseddiq N., Finite Element modeling of the behavior of polymethyl-methacrylate (PMMA) during high pressure torsion process, Frattura ed Integrità Strutturale, 52 (2020), pp.181-196;DOI:10.3221/IGF-ESIS.52.15.
[4] Hazmoune M.,Aour B., CHESNEAU X., Lazaroiu G., Hadjiat M.M., M. Debbache, CIUPAGEAN D.A., influence of the geometric and mechanical parameters on the temperature evolution within the tubes of a receiver from a solar power tower, Buletin Stiintific - Universitatea Politehnica din Bucuresti (U.P.B. Sci. Bull.), Series D, Vol. 82, Iss. 1, 2020, ISSN 1454-2358. 
[5] Sadek K., Aour B., Bennouna M.S., Talha A., Bachir Bouiadjra E.B., The Effect of corrosion on the quality repair of the aluminum alloy A 5083 H11 by bonded composites, Frattura ed Integrità Strutturale 14 (53), (2020), pp.51-65, DOI https://doi.org/10.3221/IGF-ESIS.53.05
[6] Bellali M.A., Benzaama H., Madani K., Using CZM and XFEM to predict the damage to aluminum notched plates reinforced with a composite patch, April 2020, Journal of Mechanics of Materials and Structures, 15(2):185-201,DOI: 10.2140/jomms.2020.15.185

[7] Bentahar M., Mahmoudi N., Benzaama H., modalisation et simulation des vibrations transversales et de flexion libres d'un rotor de compresseur gnl2z de sonatrch, Revue des Matériaux et Energies Renouvelable Vol 3 , N°2, pp 44-52, September 2020.https://www.asjp.cerist.dz/en/article/120217
[8] Hazmoune M., Aour B., Chesneau X., Debbache M., Ciupageanu D.A., Lazaroiu G., Hadjiat M.M., and Hamidat A., Numerical Analysis of a Solar Tower Receiver Novel Design, Sustainability 2020, 12, 6957doi:10.3390/su12176957, www.mdpi.com/journal/sustainability
[9] Bentahar M., Benzaama H., Mahmoudi N., A two dimensional Numerical Modeling of crack propagation using SFEM Method of a Homogeneous Materials Isotropic Linear Elastic. Periodica Polytechnica Mechanical Engineering, avril 2020.
[10] Harhout R., Gaceb M., Haddad S., Bloul B., Guebli A., Predictive modelling and optimization of surface roughness in turning of 1050 steel using polynomial regression, Manufacturing Technology,2020,20(5),pp.591-602

[11] Lazaroiu G., Ciupageanu DA., Hazmoune M., Vatuiu T., DESIGN OF AN ENHANCED PERFORMANCE HYBRID AUTONOMOUS SYSTEM, International Multidisciplinary Scientific GeoConference: SGEM 2020, IEEE

http://www.scopus.com/inward/record.url?eid=2-s2.0-85099786263&partnerID=MN8TOARS
[12] Daikh A. A., Drai A., Sid Ahmed Houari M. and Eltaher M.A., Static analysis of multilayer nonlocal strain gradient nanobeam reinforced by carbon nanotubes, Steel and Composite Structures, Vol. 36, No. 6 (2020), pp 643-656. DOI: https://doi.org/10.12989/scs.2020.36.6.643

[13] BensaidI., Daikh A. A., Drai A., Size-dependent free vibration and buckling analysis of sigmoid and power law functionally graded sandwich nanobeams with microstructural defects, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. Vol. 234, No. 18 (2020) pp 3667-3688.
[14] Semaoune K., Ouhna L., Brahami B., Benslimane A., Impact of E-CRM on Customer Knowledge and Loyalty: Case of the EDEN Hôtels Group of Oran. Rvue Internationale du Marketing et Management Stratégique (RIMMS), 2(4), 23-43. 2020.
[15]  Brahami M., Adjaine M., Semaoune K., & Matta N., The Influences of Knowledge Management and Customer Relationship Management to Improve Hotels Performance: A Case Study in Hotel Sector. Information Resources Management Journal (IRMJ), 33(4), 74-93. 2020. DOI:http://doi.org/10.4018/IRMJ.2020100105
[16]  Brahami M., Sabri M., and Matta N.,Towards a Model to Improve Boolean Knowledge Mapping by Using Text Mining and Its Applications: Case Study in Healthcare, International Journal of Information Retrieval Research (IJIRR), 10(3), 35-65. 2020. DOI: https://doi.org/10.4018/IJIRR.2020070103
[17]  Khalissa S., Ouhna L., Menaouer B., Benslimane A., . Impact of E-CRM on Customer Knowledge and Loyalty: Case of the EDEN Hôtels Group of Oran. Revue Internationale du Marketing et Management Stratégique (RIMMS), 2020, 2(4), pp23-43.

2019

[1] Mebarki S., Aour B., Jourdan F., Malachanne E., Belaghit A., A Study of the Biomechanical Behavior of the Implantation Method of Inverted Shoulder Prosthesis (BIO–RSA) under Different Abduction Movements, Bioengineering 2019, 6, 19; pp.1-14, ISSN: 2306-5354 doi:10.3390/bioengineering6010019.

[2]  Oudrane A., Aour B., Study and Characterization of Thermal Comfort in a Desert Climate, Advances in Systems Science and Applications, 2019; 02; 63-79, ISSN: 1078-6236, DOI.org/10.25728/assa.2019.19.2.667.http://ijassa.ipu.ru/index.php/ijassa/article/view/667.
[3]  Gasmi B., Sahli A., Benbarek S., Aour B., Initiation and propagation of a crack in the orthopedic cement of a THR using XFEM, Advances in Computational Design, Vol. 4, No. 3, pp. 295-305, 2019, ISSN: 2466-0523, DOI: https://doi.org/10.12989/acd.2019.4.3.000

[4] Oudrane A., Aour B., Belkacem Z., Xavier C., Hamouda M., Parametric Optimization of Thermal Comfort in Extreme Weather Conditions, International Journal of Engineering Research in Africa 2019, ISSN: 1663-4144, Vol. 44, pp 75-90, doi:10.4028/www.scientific.net/JERA.44.75.
[5] Keddar B., Aour B., Zahaf S., Chetti B., Bouchakour F., Najafi F.Z., Static Study and Finite Element Analysis of a New Method of Fixation of a Medial Humerus Fracture by an Intramedullary Nailing System Analyzed by the ANSYS Workbench 16.2 Calculus Code, Nano Biomedicine and Engineering, Vol. 11, Iss. 3, 2019, 11(3): 272-289. doi: 10.5101/nbe.v11i3.p272-289.
[6] Abdelouahed E.A., Benzaama H., Mokhtari M., Aour B., Pipeline repair by composite patch under temperature and Pressure loading, Frattura ed Integrità Strutturale, 49 (2019), pp. 690-697. DOI: 10.3221/IGF-ESIS.49.62
[7] Khelil F., Aour B., Talha A., Benseddiq N., Numerical investigation of mechanical behavior of cracked cruciform specimens in aluminum alloy 6082-t6 subjected to different biaxial loading conditions, Journal of Theoretical and Applied Mechanics 57, 4, pp. 1021-1037, 2019, DOI: 10.15632/jtam-pl/112458

[8] Sadek K., Bennouna M.S., Aour B., Bachir Bouiadjra E.A., Benaissa A., Fari Bouanani M., Numerical Investigation of the Adhesive Damage Used for the Repair of A5083 H11 Aluminum Structures by Composites Patches, International Journal of Engineering Research in Africa, ISSN: 1663-4144, Vol. 44, pp 22-31, 2019, doi:10.4028/www.scientific.net/JERA.44.22 

[9] Mebarki S., Aour B., Jourdan F., Malachanne E., Belaghit A.H., Numerical Study of the Biomechanical Behaviour of the Different Implantation Methods of the Reverse Shoulder Replacement, ISSN: 2296-9845, Vol. 43, pp. 54-66, 2019.
[10] Aroussi D., Aour B., Bouaziz S., A Comparative Study of 316L Stainless Steel and a Titanium Alloy in an Aggressive Biological Medium, Engineering, Technology & Applied Science Research, Vol. 9 (6), pp. 5093-5098, 2019, eISSN: 1792-8036, pISSN: 2241-4487, A Comparative Study of 316L Stainless Steel and a Titanium Alloy in  an Aggressive Biological Medium | Engineering, Technology & Applied Science Research

[11] Bentoumi M., Mdarhri A., Benzaama H., Chicot D., Contribution of interferometry to Vickers indentation toughness determination of glass and ceramic glass, Optical Engineering, 58(3), 034102-11, Proceedings - Society of Photo-Optical Instrumentation Engineers, March 2019. DOI: 10.1117/1.OE.58.3.034102

[12] Abdelouahed E., Mokhtari M., Benzaama H., Finite Element Analysis of the thermo-Mechanical Behavior of composite Pipe Elbows under Bending and Pressure loading, Frattura ed Integrità Strutturale, Frattura ed Integrità Strutturale, July 2019, 13(49):pp .698-713,DOI: 10.3221/IGF-ESIS.49.63
[13] Larbi Chaht F., Mokhtari M., Benzaama H., Using a Hashin Criteria to predict the Damage of composite notched plate under traction and torsion behavior, Frattura ed Integrità Strutturale, 13(50):331-341, August 2019. DOI: 10.3221/IGF-ESIS.50.28
[14] Benzaama A., Mokhtari M., Benzaama H., Abdelouahed E., Tamine T., Madani K., Slamen A. and Mrabet I., Using XFEM Techniques to Predict the Damage of aluminum 2024T3 notched under tensile load, Frattura ed Integrità Strutturale, vol 50, pp.184-193, October 2019, DOI: 10.3221/IGF-ESIS.50.16 
[15] Benamar B., Mokhtari M.M., Madani k., Benzaama H., Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint, Benamar Badr, M.Mohamed Mokhtari, Kouider Madani, Habib Benzaama, August 2019, Frattura ed Integrità Strutturale, 13(50):112-125,DOI: 10.3221/IGF-ESIS.50.11
[16] Abdelouahed E.A.,Benzaama H., Mokhtari M., Aour B., Pipeline repair by composite patch under tempe-rature and Pressure loading, frattura ed integrità strutturale, 2019, Vol 49, pp. 690-697; DOI: 10.3221/IGF-ESIS.49.62

[17] Benzaama A., Mokhtari M., Benzaama H., Abdelouahed E.A., Tamine T., Madani K., Using XFEM Techniques to Predict the Damage of aluminum 2024T3 notched under tensile load.” Frattura ed Integrità Strutturale 13, no. 50, (2019) : pp 184-193.
[18]  Brahami M., and Matta N., The Relationship between the Knowledge Mapping and Open Innovation Process: The Case of Education System, Artificial Intelligence for Engineering Design, Analysis and Manufacturing (AIEDAM), 33, 1-13. 2019. DOI: https://doi.org/10.1017/S0890060419000325.
[19]  Sabri M., Brahami, M., Rahal  S. A., & Matta  N., Epidemiological Researches Approach using Data Mining Techniques, The 7th International Conference on Control Engineering &Information Technology (CEIT-2019), Tetouan, Morocco on October 24–26, 2019
[20]  Abdelouahed E.A., Mokhtari M., Benzaama H.,Finite element analysis of the thermomechanical behavior of composite pipe elbows under bending and pressure loading.Frattura ed Integrità Strutturale 13.49 (2019) : pp 698-713.

2018

[1] Benyoub M., Aour B., Bouhacina B., Sadek K., Numerical Investigation of the Physical Properties Effect on the Thermal Performance of a Vertical Geothermal Heat Exchanger, Engineering Technology & Applied Science Research, Vol. 8, No. 2, 2018, pp. 2715-2723. http://etasr.com/index.php/ETASR/article/view/1827.

[2] Sadek K., Aour B., Bachir Bouiadjra E.A., Fari Bouanani M., Khelil F., Analysis of Crack Propagation by Bonded Composite for Different Patch Shapes Repairs in Marine Structures: A Numerical Analysis, International Journal of Engineering Research in Africa, ISSN: 1663-4144, Vol. 35, pp 175-184, 2018, www.scientific.net/JERA.35.175 
[3] Bennouna M.S., Aour B., Bouaksa F., Hamzaoui S., Experimental Investigation of Mechanical Behavior of a Polyamide before and after Constrained Groove Pressing Process, International Journal of Engineering Research in Africa, ISSN: 1663-4144, Vol. 36, pp 25-36, 2018, https://www.scientific.net/JERA.36.25

[4] Belaghit A., Aour B., Larabi M., Mebarki S., Numerical modeling of blood flow in a healthy aorta and aorta with stent, Journal of Biomimetics, Biomaterials and Biomedical Engineering, ISSN: 2296-9845, Vol. 39, pp 13-23, 2018,  doi:10.4028/www.scientific.net/JBBBE.39.13, https://www.scientific.net/JBBBE.39.13
[5] Zahaf S., Kebdani S., Ghalem M., Mestar A., Zina N., Aour B., Biomechanical Evaluation of two Posterior Lumbar Intervertebral Fusion Surgical Scenarios Reinforced by a Rigid Posterior Fixation System in the Vertebral ColumnAnalysed by the Finite Element Method, Nano Biomed Eng., Vol.10, Iss.3, pp.258-278, 2018.

[6] Benzaama A., Mokhtari M., Benzaama H., Gouasmi S.,  Tamine T., Using XFEM technique to predict the damage of unidirectional CFRP composite notched under tensile load, Advances in Aircraft and Spacecraft Science, Vol. 5, No. 1, 129-139, January 2018. DOI: 10.12989/aas.2018.5.1.129

[7] Hadjiat M.M., Hazmoune M., Ouali S., Gama A., Yaiche M.R., Design and analysis of a novel ICS solar water heater with CPC reflectors, Journal of Energy Storage , 16, pp.203–210, (2018).

[8] Debbache M., Karoua H., Laissaoui M., Hazmoune M., Takilalte A., Bouhallassa A., Lecheheb S., Bouaichaoui S., Hamidat A., Imessad K., Design parameters effect on annual energy production of proposed design of parabolic trough solar plant, 978-1-7281-1182-7/18, 2018 IEEE Xplore, DOI: 10.1109/IRSEC.2018.8702844

[9] BABB MM., Bouziane M., Khaldi M., Serier B., Benseddiq N., Zerdali M, Benbarek S., Bachir Bouiadjra B.A., Experimental analysis of Implant–cement interfacial behaviour under shear mode loading conditions. International Journal of Mechanics and Energy (IJME), p-ISSN: 2286-5845, e-ISSN: 2356-5640 Vol. 6, Issue 1, pp 25-31, 2018.
[10]  Brahami M., and Matta N., A model to reduce the Risk of Projects guided by the Knowledge Management Process – Application on Industrial Services, International Journal of Information Systems in the Service Sector (IJISSS), 10(2), 1-15. 2018. DOI: http://doi.org/10.4018/IJISSS.2018040103

2017

[1] Bloul B., Bourdim A., Aour B., Harhout R., Measurement default diagnostics of a roughness meter with TS100 head using a rectified specimen and solved by fuzzy logic estimator, International Journal of Advanced Manufacturing Technology, pp.1-12, 2017, DOI: 10.1007/s00170-017-0136-1, https://link.springer.com/article/10.1007/s00170-017-0136-1

[2] Oudrane A., Aour B., Zeghmati B., Chesneau X., Messaoud H., Study and Simulation of the Density of the Incident Solar Flux on the Walls of a Building in Adrar, Algeria, Engineering Technology & Applied Science Research, Vol. 7, No. 5, 2017, pp. 1940-1945, ISSN:2241-4487, e-ISSN: 1792-8036, http://www.etasr.com/index.php/ETASR/view/1337.

[3] Oudrane A., Aour B., Numerical simulation of heat exchanges for a desert house type adrar, Advanced Engineering Forum, ISSN: 2234-991X, Vol. 24, pp. 63-75, 2017, https://www.scientific.net/AEF.24.63

[4] Kebdani S., Zahaf S., Mansouri B., Aour B., Numerical study of the effect of rigid and dynamic posterior attachment systems on stress reduction in cortical and spongy bones of the lumbar segments L4-L5, Journal of Nano Biomedical and Engineering, 2017, 9(3), pp.249-274, ISSN: 2150-5578, DOI: 10.5101/nbe.v9i3.p249-274.http://nanobe.org/Assets/userfiles/sys_eb538c1c-65ff-4e82-8e6a-a1ef01127fed/files/9(3)_p249-274.pdf

[5] Oudrane A., Aour B., H. Messaoud, Numerical investigation of thermal exchanges for a habitable enclosure in a desert region, International Journal of Renewable Energy, Vol. 12, No. 2, pp. 87-105,  July - December 2017, ISSN: 1309-0127, https://www.tci-thaijo.org/index.php/RAST/issue/view/9445

[6] Bloul B., Bourdim A., Hamou S., Bourdim M., Geometric analysis of the influence of perpendicularity of a spindle axis of the milling machine on the surface quality, Advances in Mechanical Engineering, 2017, Vol. 9(3) 1–8, ISSN: 1687-8140, DOI: 10.1177/1687814017700831.

[7] Mokhtari M., Madani K., Benzaama H., Malarino S., Effects of the composite stacking sequence on the failure load of the single lap bonded joint, Journal of Theoretical and Applied Mechanics 55(4):1257-1268, 2017. DOI: 10.15632/jtam-pl.55.4.1257

[8] Bentahar M., Benzaama H., Bentoumi M., Mokhtari M., Stretching Finite Element Method 2D Crack Propagation, Journal of Theorotical and Applied Mechanics, Volume 55,3, pppp 869-881,  July 2017. DOI: 10.15632/jtam-pl.55.3.869
[9] Bentoumi M., Bouzid D., Benzaama H., Mejias A., Kossman S., A. Montagne and A. Iost D. Chicot, Multiscale and multicycle instrumented indentation to determine mechanical properties: Application to the BK7 crown borosilicate, Journal of Material Research, Volume 32 - Issue 8 - January 2017 , DOI: 10.1557/jmr.2016.523
[10] Khelil F., Belhouari M., Aour B., Benseddiq N., Numerical Evaluation of Fracture Parameters using Strain Difference Method, Journal of the Brazilian Society of Mechanical Sciences and Engineering, ISSN 1678-5878, , Vol.39(2), pp 589–599, 2017. DOI 10.1007/s40430-016-0520-z, https://link.springer.com/article/10.1007/s40430-016-0520-z
[11] Mitsak A., Aour B., Numerical and experimental investigation of HDPE behavior during 2-ECAP process using 90° and 120° dies, Journal of the Brazilian Society of Mechanical Sciences and Engineering, ISSN 1678-5878, Vol. 39 (6), pp. 2055–2069, 2017. DOI: 10.1007/s40430-016-0563-1, https://link.springer.com/article/10.1007/s40430-016-0563-1

[12]  Sabri M., Brahami M., Rahal S. A., & Matta N.,  Epidemiological Knowledge Mapping since the Integrating Heterogeneous Data until the ServiceOriented Data Mining Platform, The 5th International Conference on Control Engineering & Information Technology (CEIT-2017), Sousse, Tunisia on December 17–19,2017.http://allconferencecfpalerts.blogspot.com/2017/04/5th-international-conference-oncontrol.html

2016

[1] Aour B., Mitsak A., Analysis of plastic deformation of semi-crystalline polymers during ECAE process using 135° die Bending, Journal of Theoretical and Applied Mechanics, ISSN 1429-2955, Vol. 54,1, pp. 263-275, 2016 DOI: 10.15632/jtam-pl.54.1.263, http://www.ptmts.org.pl/jtam/index.php/jtam/article/view/1958
[2] Khelil F., Belhouari M., Aour B., Benseddiq N., Numerical Evaluation of Fracture Parameters using Strain Difference Method, Journal of the Brazilian Society of Mechanical Sciences and Engineering, ISSN 1678-5878, Vol.39(2), pp 589–599, 2016. DOI 10.1007/s40430-016-0520-z, https://link.springer.com/article/10.1007/s40430-016-0520-z
[3] Mitsak A., Aour B., Numerical Modelling Of HDPE BehavIor During 2-ECAE Process Using 90° And 120° Dies, Journal of the Brazilian Society of Mechanical Sciences and Engineering, ISSN 1678-5878, Vol. 39 (6), pp. 2055–2069, 2016. DOI 10.1007/s40430-016-0563-1, https://link.springer.com/article/10.1007/s40430-016-0563-1
[4] Hazmoune M., Aour B., Bouhallassa A., Lecheheb S., Laissaoui M., Hamidat A., 3D simulation study of a receiver on a solar power tower, International Journal of Control Theory and Applications, 9(38), pp. 141-148, 2016.
[5] Bounouara F., Benrahou K.H., Belkorissat I., Tounsi A., A nonlocal zeroth-order shear deformation theory for free vibration of functionally graded nanoscale plates resting on elastic foundation, Steel and Composite Structures, Vol 20, N°2,  pp 227-249, 2016, pISSN:1229-9367, eISSN: 1598-6233

[6] Hazmoune M., Aour B., Bouhallassa A., Lecheheb S., Laissaoui M., Hamidat A., 3D simulation study of a receiver on a solar power tower, International Journal of Control Theory and Applications, 9(38), pp. 141-148, 2016. http://serialsjournals.com/serialjournalmanager/pdf/1499771289.pdf

[7] Khaldi M., Vivet A., Bourmaud A., Sereir Z., Kada B., Damage analysis of composites reinforced with Alfa fibers: Viscoelastic behavior and debonding at the fiber/matrix interface. Journal of Applied Polymer Science. 2016, 133, 43760.
[8] Sadek K., Bennouna M.S., Abdelouahed E.A., Aour B., Etude du mécanisme de fatigue par vieillissement thermique de l’alliage d’aluminium A5086. ELWAHAT 9.1 ,2016.

2015

[1] Damba N., Aour B., Three Dimensional Finite Element Investigation of the Mechanical Response of the C5-C6 Functional Spinal Unit Under Flexion, Extension and Lateral Bending, International Review on Modelling and Simulations (I.RE.MO.S.), ISSN 1974-9821, Vol.8, N°4, pp. 493-498, August  2015. DOI: http://dx.doi.org/10.15866/iremos.v8i4.6969
[2]  Khelil F., Belhouari M., Aour B., Benhamena A., Benaoum F., A New FEM Approach for the Determination of Fracture Parameters in Polymethyl-metacrylate PMMA , Manufacturing Science and Technology 3(5): 294-299, ISSN: 2333-2735, DOI: 10.13189/mst.2015.030516 , 2015 .http://www.hrpub.org.
[3] Bendaoud M., Madouri D., Zanoun A. and Belaidi A., Simulation model of monolayer growth kinetics of Fe2B phase, Matériaux & Techniques, Vol.103 (703), N°7, 2015, ISSN : 0032-6895, DOI: http://dx.doi.org/10.1051/mattech/2015058.
[4]  Brahami M., Atmani B., & Matta  N., An Approach to Dynamic Fusion of the Knowledge Maps of an Activities Process: Application on Healthcare, International Journal of Information Systems in the Service Sector, 7(4), 1-25. 2015. DOI: http://doi.org/10.4018/IJISSS.2015100101
[5]  Brahami M., Semaoune K., Benziane A., & Touati A., An approach of support innovation guided by knowledge capitalization: Application on FERTIAL, 4th International Conference on Leadership, Technology and Innovation Management, Journal of Procedia - Social and Behavioral Sciences, Elsevier, 181, pp 197-206. 2015.
[6]  Brahami M., Matta N., & Semaoune K., Towards a model to reduce the Risk of Projects guided by the Knowledge Management Process – Application on FERTIAL, 7th International Conference on Knowledge Management and Information Sharing (KMIS’15), 12-14 November 2015, Lisbon, Portugal, Proceeding of the 7th International Joint Conference on Knowledge Discovery, Knowledge Engineering, and
Knowledge Management, 98-105. DOI:10.5220/0005581500980105; ISBN: 978-989-758-
158-8. 2015
[7]  Brahami M., Semaoune K., & Benziane A., Communication in the 2nd. International Conference on Education, intituled “Vers une relation entre la capitalisation des connaissances et le processus d’innovation: Application dans le système éducatif”, Interuniversity Research Center on Training and Teaching Profession (CRIFPE), April 30 and May 01, 2015, Montreal, Canada.
[8]  Brahami M., Matta N., & Semaoune K., Communication in the Framework of 6th. International Conference on Information Systems and Economic Intelligence (SIIE’2015), Entitled “The Relationship between Knowledge Management and Innovation process in FERTIAL company”, February 12, 13 and 14. 2015 in Hammamet (Tunisia).
[9]  Brahami M., Matta N., & Semaoune K.,  Communication in the framework of 6th. International Conference on Information Systems and Economic Intelligence (SIIE’2015), Entitled “Integration of the knowledge management process into risk management process – Moving towards actors of project approach”, February 12 th., 13 th. & 14 th. 2015 in Hammamet (Tunisia)

2014

[1] Boumaiza D., Aour B.,  On the efficiency of the Iterative coupling FEM-BEM for solving the elasto-plastic problems, Engineering and Structures, ISSN: 0141-0296, Volume 72, 2014, Pages 12-25. http://www.sciencedirect.com/science/article/pii/S0141029614002065
[2]  Mitsak A., Aour B., Numericale Invstigation of Plastic Deformation in Tow-turn Equal Channel Angular Extrusion, Engineering Technology & Applied Science Research, ISSN (print): 2241-4487, Vol. 4, No. 6; 2014, 728-733. http://etasr.com/index.php/ETASR/article/view/517
[3]  Aour B., Damba N., Finite Element Investigation of the Intervertebral Disc Behaviour, Computer Methods in Biomechanics and Biomedical Engineering, ISSN : 1025-5842,  Vol. 17, No. S1; 2014, 58-59. http://dx.doi.org/10.1080/10255842.2014.931113.
[4] Khelil  F., Belhouari M., Benseddiq N., Talha A., A Numerical Approach for the Determination of Mode I Stress Intensity Factors in PMMA Materials Revue Engineering, Technology & Applied Science Research, ISSN : 2241-4487, Vol. 4, No. 3, 2014, 644-648. http://etasr.com/index.php/ETASR/article/view/442
[5] Della N., Larabi M., Elastoplastic Models Based on a Structural Local Approach for  Predicting the Ratcheting, J CHIN SOC MECH ENG, 2014
[6] Ghebriout B., Moualek S., Baba-Ahmed M. , Uhl J-F, Delmas V., Les nouveaux outils informatiques pour la dissection anatomique virtuelle du corps humain, Morphologie, ISSN: 1286-0115, Vol. 98, N° 322  pp. 143-144 (septembre 2014), Doi : 10.1016/j.morpho.2014.04.106, http://emvmsa1a.jouve-hdi.com/article/921710
[7] Moualek S., Ghebriout B., Taibi A., Conservation des coupes anatomiques du cerveau par la technique de plastination, Morphologie, ISSN: 1286-0115, Vol.98, N° 322, pp. 146-147 (septembre 2014), Doi : 10.1016/j.morpho.2014.04.115, http://emvmsa1a.jouve-hdi.com/article/921721
[8] Uhl J-F, Ghebriout B., Chahim M., Delmas V., Les nouveaux outils numériques pour   l’enseignement et la recherche en anatomie.  Morphologie, ISSN: 1286-0115, Vol. 98, N° 322,  p.150, (septembre 2014), Doi : 10.1016/j.morpho.2014.04.124, http://www.journals.elsevier.com/morphologie
[9] Brahami M., Semaoune K., & Benziane A. Communication in the framework of 5th Management colloquium of Organizational Technologies (MTO’2014), Entitled “Towards a knowledge-sharing mechanism via digital networks guided by communities of practice and knowledge mapping: case of ATM Mobilis - Algeria, October, 2nd & 3rd. 2014, School of Mines of Ales, Nimes, France
[10]  Brahami M., Semaoune  K., & Benziane A., Communication in the framework of 4th International Conference on Leadership, Technology, Innovation and Business Management (ICLTIBM’14), Entitled “Towards a new approach of support innovation guided by knowledge management: Application on FERTIAL”, November 20-22, 2014 Istanbul-Turkey.
[11] Bloul B., Bourdim A., Gaceb M., Harhout R., Machining a drill tool holder to determine neural network roughness, JIFT 2014 - Mulhouse (France), May 26-28, 2014

2013

[1] Draï A., Aour B., Analysis of plastic deformation behavior of HDPE during high pressure torsion process, Engineering & Structures, ISSN: 0141-0296, 46, 87-93, 2013. http://www.journals.elsevier.com/engineering-structures/
[2] Khelil F., Aour B., Belhouari M., Bensaddiq N., Modeling of fatigue crack propagation in Aluminum alloys using energy based approach, Engineering Technology & Applied Science Research, ISSN (print): 2241-4487, Vol. 3, No. 4; 2013, 488-496. http://etasr.com/index.php/ETASR/issue/view/20
[3] Khelil F., Belhouari M., Aour B., Benhamena A., Benaoum F., Modeling of Fatigue Crack Propagation in Aluminium Alloys Using an Energy Based Approach ETASR - Engineering, Technology & Applied Science Research, ISSN : 2241-4487, e-ISSN 1792-8036 Vol. 3, No. 4; 2013, 488-496. http://etasr.com/index.php/ETASR/issue/view/20.
[4] Ghebriout B., Moualek S., Taibi A., Baba-Ahmed M., La plastination : nouvelles technique de conservation des pièces anatomiques, Morphologie, ISSN: 1286-0115, Vol 97 - N° 318-319, pp. 103-104. Octobre-Décembre 2013. Doi : 10.1016/j.morpho.2013.09.011, http://www.journals.elsevier.com/morphologie
[5]  Brahami M., Atmani B., & Matta N., Dynamic knowledge mapping guided by data mining: Application on Healthcare, Journal of Information Processing Systems, 9(1), 1 - 30. 2013.
[6] Brahami M., Atmani  B., & Matta N., Using rules to enhance evolution of knowledge mapping: Application on Healthcare, International Journal of Computer Science Issues (IJCSI), 10(3), 1-10.2013.
[7] Brahami M., Atmani  B., & Matta N., Knowledge mapping evolution guided by data mining, International Journal of Computer Applications (IJCA), 72, 1-10. 2013.
[8] Bloul B., Bourdim A., Arezki K., Bourdim M., Choice of shape of probe for determination of the defects of involute gears on MMT, 11th mechanical Congress Agadir (Morocco), from 23 to 26 April 2013.
[9] Bloul B., Bourdim A., Bourdim M., Modelling control gears with straight teeth by using the neural networks, 21st French Mechanics Congress, Bordeaux (France), August 26-30, 2013.
[10] Bloul B., Bourdim A., Bourdim M., Checks computer-assisted gear defects using probe calibration, 11th Mechanics Congress, Agadir (Morocco) from 23 to 26 April 2013.